Login
Domainim is a fast domain reconnaissance tool for organizational network scanning. The tool aims to provide a brief overview of an organization's structure using techniques like OSINT, bruteforcing, DNS resolving etc.
Current features (v1.0.1)- - Subdomain enumeration (2 engines + bruteforcing) - User-friendly output - Resolving A records (IPv4)
A few features are work in progress. See Planned features for more details.
The project is inspired by Sublist3r. The port scanner module is heavily based on NimScan.
You can build this repo from source- - Clone the repository
FreshRSS git clone git@github.com:pptx704/domainim
nimble build
./domainim <domain> [--ports=<ports>]
Or, you can just download the binary from the release page. Keep in mind that the binary is tested on Debian based systems only.
./domainim <domain> [--ports=<ports> | -p:<ports>] [--wordlist=<filename> | l:<filename> [--rps=<int> | -r:<int>]] [--dns=<dns> | -d:<dns>] [--out=<filename> | -o:<filename>]
<domain> is the domain to be enumerated. It can be a subdomain as well.-- ports | -p is a string speicification of the ports to be scanned. It can be one of the following-all - Scan all ports (1-65535)none - Skip port scanning (default)t<n> - Scan top n ports (same as nmap). i.e. t100 scans top 100 ports. Max value is 5000. If n is greater than 5000, it will be set to 5000.80 scans port 8080-100 scans ports 80 to 10080,443,8080 scans ports 80, 443 and 808080,443,8080-8090,t500 scans ports 80, 443, 8080 to 8090 and top 500 ports--dns | -d is the address of the dns server. This should be a valid IPv4 address and can optionally contain the port number-a.b.c.d - Use DNS server at a.b.c.d on port 53a.b.c.d#n - Use DNS server at a.b.c.d on port e
--wordlist | -l - Path to the wordlist file. This is used for bruteforcing subdomains. If the file is invalid, bruteforcing will be skipped. You can get a wordlist from SecLists. A wordlist is also provided in the release page.--rps | -r - Number of requests to be made per second during bruteforce. The default value is 1024 req/s. It is to be noted that, DNS queries are made in batches and next batch is made only after the previous one is completed. Since quries can be rate limited, increasing the value does not always guarantee faster results.--out | -o - Path to the output file. The output will be saved in JSON format. The filename must end with .json.Examples - ./domainim nmap.org --ports=all - ./domainim google.com --ports=none --dns=8.8.8.8#53 - ./domainim pptx704.com --ports=t100 --wordlist=wordlist.txt --rps=1500 - ./domainim pptx704.com --ports=t100 --wordlist=wordlist.txt --outfile=results.json - ./domainim mysite.com --ports=t50,5432,7000-9000 --dns=1.1.1.1
The help menu can be accessed using ./domainim --help or ./domainim -h.
Usage:
domainim <domain> [--ports=<ports> | -p:<ports>] [--wordlist=<filename> | l:<filename> [--rps=<int> | -r:<int>]] [--dns=<dns> | -d:<dns>] [--out=<filename> | -o:<filename>]
domainim (-h | --help)
Options:
-h, --help Show this screen.
-p, --ports Ports to scan. [default: `none`]
Can be `all`, `none`, `t<n>`, single value, range value, combination
-l, --wordlist Wordlist for subdomain bruteforcing. Bruteforcing is skipped for invalid file.
-d, --dns IP and Port for DNS Resolver. Should be a valid IPv4 with an optional port [default: system default]
-r, --rps DNS queries to be made per second [default: 1024 req/s]
-o, --out JSON file where the output will be saved. Filename must end with `.json`
Examples:
domainim domainim.com -p:t500 -l:wordlist.txt --dns:1.1.1.1#53 --out=results.json
domainim sub.domainim.com --ports=all --dns:8.8.8.8 -t:1500 -o:results.json
The JSON schema for the results is as follows-
[
{
"subdomain": string,
"data": [
"ipv4": string,
"vhosts": [string],
"reverse_dns": string,
"ports": [int]
]
}
]
Example json for nmap.org can be found here.
Contributions are welcome. Feel free to open a pull request or an issue.
This project is still in its early stages. There are several limitations I am aware of.
The two engines I am using (I'm calling them engine because Sublist3r does so) currently have some sort of response limit. dnsdumpster.com">dnsdumpster can fetch upto 100 subdomains. crt.sh also randomizes the results in case of too many results. Another issue with crt.sh is the fact that it returns some SQL error sometimes. So for some domain, results can be different for different runs. I am planning to add more engines in the future (at least a brute force engine).
The port scanner has only ping response time + 750ms timeout. This might lead to false negatives. Since, domainim is not meant for port scanning but to provide a quick overview, such cases are acceptable. However, I am planning to add a flag to increase the timeout. For the same reason, filtered ports are not shown. For more comprehensive port scanning, I recommend using Nmap. Domainim also doesn't bypass rate limiting (if there is any).
It might seem that the way vhostnames are printed, it just brings repeition on the table.
Printing as the following might've been better-
ack.nmap.org, issues.nmap.org, nmap.org, research.nmap.org, scannme.nmap.org, svn.nmap.org, www.nmap.org
β³ 45.33.49.119
β³ Reverse DNS: ack.nmap.org.
But previously while testing, I found cases where not all IPs are shared by same set of vhostnames. That is why I decided to keep it this way.
DNS server might have some sort of rate limiting. That's why I added random delays (between 0-300ms) for IPv4 resolving per query. This is to not make the DNS server get all the queries at once but rather in a more natural way. For bruteforcing method, the value is between 0-1000ms by default but that can be changed using --rps | -t flag.
One particular limitation that is bugging me is that the DNS resolver would not return all the IPs for a domain. So it is necessary to make multiple queries to get all (or most) of the IPs. But then again, it is not possible to know how many IPs are there for a domain. I still have to come up with a solution for this. Also, nim-ndns doesn't support CNAME records. So, if a domain has a CNAME record, it will not be resolved. I am waiting for a response from the author for this.
For now, bruteforcing is skipped if a possible wildcard subdomain is found. This is because, if a domain has a wildcard subdomain, bruteforcing will resolve IPv4 for all possible subdomains. However, this will skip valid subdomains also (i.e. scanme.nmap.org will be skipped even though it's not a wildcard value). I will add a --force-brute | -fb flag later to force bruteforcing.
Similar thing is true for VHost enumeration for subdomain inputs. Since, urls that ends with given subdomains are returned, subdomains of similar domains are not considered. For example, scannme.nmap.org will not be printed for ack.nmap.org but something.ack.nmap.org might be. I can search for all subdomains of nmap.org but that defeats the purpose of having a subdomains as an input.
MIT License. See LICENSE for full text.
Download the binaries
or build the binaries and you are ready to go:
$ git clone https://github.com/Nemesis0U/PingRAT.git
$ go build client.go
$ go build server.go
./server -h
Usage of ./server:
-d string
Destination IP address
-i string
Listener (virtual) Network Interface (e.g. eth0)
./client -h
Usage of ./client:
-d string
Destination IP address
-i string
(Virtual) Network Interface (e.g., eth0)
AzSubEnum is a specialized subdomain enumeration tool tailored for Azure services. This tool is designed to meticulously search and identify subdomains associated with various Azure services. Through a combination of techniques and queries, AzSubEnum delves into the Azure domain structure, systematically probing and collecting subdomains related to a diverse range of Azure services.
AzSubEnum operates by leveraging DNS resolution techniques and systematic permutation methods to unveil subdomains associated with Azure services such as Azure App Services, Storage Accounts, Azure Databases (including MSSQL, Cosmos DB, and Redis), Key Vaults, CDN, Email, SharePoint, Azure Container Registry, and more. Its functionality extends to comprehensively scanning different Azure service domains to identify associated subdomains.
With this tool, users can conduct thorough subdomain enumeration within Azure environments, aiding security professionals, researchers, and administrators in gaining insights into the expansive landscape of Azure services and their corresponding subdomains.
During my learning journey on Azure AD exploitation, I discovered that the Azure subdomain tool, Invoke-EnumerateAzureSubDomains from NetSPI, was unable to run on my Debian PowerShell. Consequently, I created a crude implementation of that tool in Python.
β AzSubEnum git:(main) β python3 azsubenum.py --help
usage: azsubenum.py [-h] -b BASE [-v] [-t THREADS] [-p PERMUTATIONS]
Azure Subdomain Enumeration
options:
-h, --help show this help message and exit
-b BASE, --base BASE Base name to use
-v, --verbose Show verbose output
-t THREADS, --threads THREADS
Number of threads for concurrent execution
-p PERMUTATIONS, --permutations PERMUTATIONS
File containing permutations
Basic enumeration:
python3 azsubenum.py -b retailcorp --thread 10
Using permutation wordlists:
python3 azsubenum.py -b retailcorp --thread 10 --permutation permutations.txt
With verbose output:
python3 azsubenum.py -b retailcorp --thread 10 --permutation permutations.txt --verbose
Mass bruteforce network protocols
Simple personal script to quickly mass bruteforce common services in a large scale of network.
It will check for default credentials on ftp, ssh, mysql, mssql...etc.
This was made for authorized red team penetration testing purpose only.
masscan(faster than nmap) to find alive hosts with common ports from network segment.masscan result.hydra commands to automatically bruteforce supported network services on devices.Kali linux or any preferred linux distributionPython 3.10+# Clone the repo
git clone https://github.com/opabravo/mass-bruter
cd mass-bruter
# Install required tools for the script
apt update && apt install seclists masscan hydraPrivate ip range :
10.0.0.0/8,192.168.0.0/16,172.16.0.0/12
Save masscan results under ./result/masscan/, with the format masscan_<name>.<ext>
Ex: masscan_192.168.0.0-16.txt
Example command:
masscan -p 3306,1433,21,22,23,445,3389,5900,6379,27017,5432,5984,11211,9200,1521 172.16.0.0/12 | tee ./result/masscan/masscan_test.txtExample Resume Command:
masscan --resume paused.conf | tee -a ./result/masscan/masscan_test.txtCommand Options
βββ(rootγΏroot)-[~/mass-bruter]
ββ# python3 mass_bruteforce.py
Usage: [OPTIONS]
Mass Bruteforce Script
Options:
-q, --quick Quick mode (Only brute telnet, ssh, ftp , mysql,
mssql, postgres, oracle)
-a, --all Brute all services(Very Slow)
-s, --show Show result with successful login
-f, --file-path PATH The directory or file that contains masscan result
[default: ./result/masscan/]
--help Show this message and exit.Quick Bruteforce Example:
python3 mass_bruteforce.py -q -f ~/masscan_script.txtFetch cracked credentials:
python3 mass_bruteforce.py -sdpl4hydra
Any contributions are welcomed!
Hades is a basic Command & Control server built using Python. It is currently extremely bare bones, but I plan to add more features soon. Features are a work in progress currently.
This is a project made (mostly) for me to learn Malware Development, Sockets, and C2 infrastructure setups. Currently, the server can be used for CTFs but it is still a buggy mess with a lot of things that need ironed out.
I am working on a Web UI using Flask currently so new features are being put on hold until then, if you face any issues then please be sure to create an issues request.
Listener Commands
---------------------------------------------------------------------------------------
listeners -g --generate --> Generate Listener
Session Commands
---------------------------------------------------------------------------------------
sessions -l --list --> List Sessions
sessions -i --interact --> Interact with Session
sessions -k --kill <value> --> Kill Active Session
Payload Commands
---------------------------------------------------------------------------------------
winplant.py --> Windows Python Implant
exeplant.py --> Windows Executable Implant
linplant.py --> Linux Implant
pshell_shell --> Powershell Implant
Client Commands
-------- -------------------------------------------------------------------------------
persist / pt --> Persist Payload (After Interacting with Session)
background / bg --> Background Session
exit --> Kill Client Connection
Misc Commands
---------------------------------------------------------------------------------------
help / h --> Show Help Menu
clear / cls --> Clear Screengit clone https://github.com/lavender-exe/Hades-C2.git
cd Hades-C2
# Windows
python install.py
# Linux
python3 install.py
python3 hades-c2.pypython hades-c2.py
listeners -g / --generate to generate a listenerwinplant.py, linplant.py or exeplant.py
See the open issues for a list of proposed features (and known issues).
Contributions are what make the open source community such an amazing place to be learn, inspire, and create. Any contributions you make are greatly appreciated.
git checkout -b feature/AmazingFeature)git commit -m 'Add some AmazingFeature')git push origin feature/AmazingFeature)Distributed under the MIT License. See LICENSE for more information.
How PurpleOps is different:
# Clone this repository
$ git clone https://github.com/CyberCX-STA/PurpleOps
# Go into the repository
$ cd PurpleOps
# Alter PurpleOps settings (if you want to customize anything but should work out the box)
$ nano .env
# Run the app with docker
$ sudo docker compose up
# PurpleOps should now by available on http://localhost:5000, it is recommended to add a reverse proxy such as nginx or Apache in front of it if you want to expose this to the outside world.
# Alternatively
$ sudo docker run --name mongodb -d -p 27017:27017 mongo
$ pip3 install -r requirements.txt
$ python3 seeder.py
$ python3 purpleops.pyWe would love to hear back from you, if something is broken or have and idea to make it better add a ticket or ping us pops@purpleops.app | @_w_m__
xsubfind3r is a command-line interface (CLI) utility to find domain's known subdomains from curated passive online sources.
Fetches domains from curated passive sources to maximize results.
Supports stdin and stdout for easy integration into workflows.
Cross-Platform (Windows, Linux & macOS).
Visit the releases page and find the appropriate archive for your operating system and architecture. Download the archive from your browser or copy its URL and retrieve it with wget or curl:
...with wget:
wget https://github.com/hueristiq/xsubfind3r/releases/download/v<version>/xsubfind3r-<version>-linux-amd64.tar.gz...or, with curl:
curl -OL https://github.com/hueristiq/xsubfind3r/releases/download/v<version>/xsubfind3r-<version>-linux-amd64.tar.gz...then, extract the binary:
tar xf xsubfind3r-<version>-linux-amd64.tar.gzTIP: The above steps, download and extract, can be combined into a single step with this onliner
curl -sL https://github.com/hueristiq/xsubfind3r/releases/download/v<version>/xsubfind3r-<version>-linux-amd64.tar.gz | tar -xzv
NOTE: On Windows systems, you should be able to double-click the zip archive to extract the xsubfind3r executable.
...move the xsubfind3r binary to somewhere in your PATH. For example, on GNU/Linux and OS X systems:
sudo mv xsubfind3r /usr/local/bin/NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xsubfind3r to their PATH.
Before you install from source, you need to make sure that Go is installed on your system. You can install Go by following the official instructions for your operating system. For this, we will assume that Go is already installed.
go install ...go install -v github.com/hueristiq/xsubfind3r/cmd/xsubfind3r@latestgo build ... the development VersionClone the repository
git clone https://github.com/hueristiq/xsubfind3r.git Build the utility
cd xsubfind3r/cmd/xsubfind3r && \
go build .Move the xsubfind3r binary to somewhere in your PATH. For example, on GNU/Linux and OS X systems:
sudo mv xsubfind3r /usr/local/bin/NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xsubfind3r to their PATH.
NOTE: While the development version is a good way to take a peek at xsubfind3r's latest features before they get released, be aware that it may have bugs. Officially released versions will generally be more stable.
xsubfind3r will work right after installation. However, BeVigil, Chaos, Fullhunt, Github, Intelligence X and Shodan require API keys to work, URLScan supports API key but not required. The API keys are stored in the $HOME/.hueristiq/xsubfind3r/config.yaml file - created upon first run - and uses the YAML format. Multiple API keys can be specified for each of these source from which one of them will be used.
Example config.yaml:
version: 0.3.0
sources:
- alienvault
- anubis
- bevigil
- chaos
- commoncrawl
- crtsh
- fullhunt
- github
- hackertarget
- intelx
- shodan
- urlscan
- wayback
keys:
bevigil:
- awA5nvpKU3N8ygkZ
chaos:
- d23a554bbc1aabb208c9acfbd2dd41ce7fc9db39asdsd54bbc1aabb208c9acfb
fullhunt:
- 0d9652ce-516c-4315-b589-9b241ee6dc24
github:
- d23a554bbc1aabb208c9acfbd2dd41ce7fc9db39
- asdsd54bbc1aabb208c9acfbd2dd41ce7fc9db39
intelx:
- 2.intelx.io:00000000-0000-0000-0000-000000000000
shodan:
- AAAAClP1bJJSRMEYJazgwhJKrggRwKA
urlscan:
- d4c85d34-e425-446e-d4ab-f5a3412acbe8To display help message for xsubfind3r use the -h flag:
xsubfind3r -hhelp message:
_ __ _ _ _____
__ _____ _ _| |__ / _(_)_ __ __| |___ / _ __
\ \/ / __| | | | '_ \| |_| | '_ \ / _` | |_ \| '__|
> <\__ \ |_| | |_) | _| | | | | (_| |___) | |
/_/\_\___/\__,_|_.__/|_| |_|_| |_|\__,_|____/|_| v0.3.0
USAGE:
xsubfind3r [OPTIONS]
INPUT:
-d, --domain string[] target domains
-l, --list string target domains' list file path
SOURCES:
--sources bool list supported sources
-u, --sources-to-use string[] comma(,) separeted sources to use
-e, --sources-to-exclude string[] comma(,) separeted sources to exclude
OPTIMIZATION:
-t, --threads int number of threads (default: 50)
OUTPUT:
--no-color bool disable colored output
-o, --output string output subdomains' file path
-O, --output-directory string output subdomains' directory path
-v, --verbosity string debug, info, warning, error, fatal or silent (default: info)
CONFIGURATION:
-c, --configuration string configuration file path (default: ~/.hueristiq/xsubfind3r/config.yaml)
Issues and Pull Requests are welcome! Check out the contribution guidelines.
This utility is distributed under the MIT license.
xcrawl3r is a command-line interface (CLI) utility to recursively crawl webpages i.e systematically browse webpages' URLs and follow links to discover linked webpages' URLs.
.js, .json, .xml, .csv, .txt & .map).robots.txt.Visit the releases page and find the appropriate archive for your operating system and architecture. Download the archive from your browser or copy its URL and retrieve it with wget or curl:
...with wget:
wget https://github.com/hueristiq/xcrawl3r/releases/download/v<version>/xcrawl3r-<version>-linux-amd64.tar.gz...or, with curl:
curl -OL https://github.com/hueristiq/xcrawl3r/releases/download/v<version>/xcrawl3r-<version>-linux-amd64.tar.gz...then, extract the binary:
tar xf xcrawl3r-<version>-linux-amd64.tar.gzTIP: The above steps, download and extract, can be combined into a single step with this onliner
curl -sL https://github.com/hueristiq/xcrawl3r/releases/download/v<version>/xcrawl3r-<version>-linux-amd64.tar.gz | tar -xzv
NOTE: On Windows systems, you should be able to double-click the zip archive to extract the xcrawl3r executable.
...move the xcrawl3r binary to somewhere in your PATH. For example, on GNU/Linux and OS X systems:
sudo mv xcrawl3r /usr/local/bin/NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xcrawl3r to their PATH.
Before you install from source, you need to make sure that Go is installed on your system. You can install Go by following the official instructions for your operating system. For this, we will assume that Go is already installed.
go install ...go install -v github.com/hueristiq/xcrawl3r/cmd/xcrawl3r@latestgo build ... the development VersionClone the repository
git clone https://github.com/hueristiq/xcrawl3r.git Build the utility
cd xcrawl3r/cmd/xcrawl3r && \
go build .Move the xcrawl3r binary to somewhere in your PATH. For example, on GNU/Linux and OS X systems:
sudo mv xcrawl3r /usr/local/bin/NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xcrawl3r to their PATH.
NOTE: While the development version is a good way to take a peek at xcrawl3r's latest features before they get released, be aware that it may have bugs. Officially released versions will generally be more stable.
To display help message for xcrawl3r use the -h flag:
xcrawl3r -hhelp message:
_ _____
__ _____ _ __ __ ___ _| |___ / _ __
\ \/ / __| '__/ _` \ \ /\ / / | |_ \| '__|
> < (__| | | (_| |\ V V /| |___) | |
/_/\_\___|_| \__,_| \_/\_/ |_|____/|_| v0.1.0
A CLI utility to recursively crawl webpages.
USAGE:
xcrawl3r [OPTIONS]
INPUT:
-d, --domain string domain to match URLs
--include-subdomains bool match subdomains' URLs
-s, --seeds string seed URLs file (use `-` to get from stdin)
-u, --url string URL to crawl
CONFIGURATION:
--depth int maximum depth to crawl (default 3)
TIP: set it to `0` for infinite recursion
--headless bool If true the browser will be displayed while crawling.
-H, --headers string[] custom header to include in requests
e.g. -H 'Referer: http://example.com/'
TIP: use multiple flag to set multiple headers
--proxy string[] Proxy URL (e.g: http://127.0.0.1:8080)
TIP: use multiple flag to set multiple proxies
--render bool utilize a headless chrome instance to render pages
--timeout int time to wait for request in seconds (default: 10)
--user-agent string User Agent to use (default: web)
TIP: use `web` for a random web user-agent,
`mobile` for a random mobile user-agent,
or you can set your specific user-agent.
RATE LIMIT:
-c, --concurrency int number of concurrent fetchers to use (default 10)
--delay int delay between each request in seconds
--max-random-delay int maximux extra randomized delay added to `--dalay` (default: 1s)
-p, --parallelism int number of concurrent URLs to process (default: 10)
OUTPUT:
--debug bool enable debug mode (default: false)
-m, --monochrome bool coloring: no colored output mode
-o, --output string output file to write found URLs
-v, --verbosity string debug, info, warning, error, fatal or silent (default: debug)
Issues and Pull Requests are welcome! Check out the contribution guidelines.
This utility is distributed under the MIT license.
Alternatives - Check out projects below, that may fit in your workflow:
xurlfind3r is a command-line interface (CLI) utility to find domain's known URLs from curated passive online sources.
robots.txt snapshots.Visit the releases page and find the appropriate archive for your operating system and architecture. Download the archive from your browser or copy its URL and retrieve it with wget or curl:
...with wget:
wget https://github.com/hueristiq/xurlfind3r/releases/download/v<version>/xurlfind3r-<version>-linux-amd64.tar.gz...or, with curl:
curl -OL https://github.com/hueristiq/xurlfind3r/releases/download/v<version>/xurlfind3r-<version>-linux-amd64.tar.gz...then, extract the binary:
tar xf xurlfind3r-<version>-linux-amd64.tar.gzTIP: The above steps, download and extract, can be combined into a single step with this onliner
curl -sL https://github.com/hueristiq/xurlfind3r/releases/download/v<version>/xurlfind3r-<version>-linux-amd64.tar.gz | tar -xzv
NOTE: On Windows systems, you should be able to double-click the zip archive to extract the xurlfind3r executable.
...move the xurlfind3r binary to somewhere in your PATH. For example, on GNU/Linux and OS X systems:
sudo mv xurlfind3r /usr/local/bin/NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xurlfind3r to their PATH.
Before you install from source, you need to make sure that Go is installed on your system. You can install Go by following the official instructions for your operating system. For this, we will assume that Go is already installed.
go install ...go install -v github.com/hueristiq/xurlfind3r/cmd/xurlfind3r@latestgo build ... the development VersionClone the repository
git clone https://github.com/hueristiq/xurlfind3r.git Build the utility
cd xurlfind3r/cmd/xurlfind3r && \
go build .Move the xurlfind3r binary to somewhere in your PATH. For example, on GNU/Linux and OS X systems:
sudo mv xurlfind3r /usr/local/bin/NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xurlfind3r to their PATH.
NOTE: While the development version is a good way to take a peek at xurlfind3r's latest features before they get released, be aware that it may have bugs. Officially released versions will generally be more stable.
xurlfind3r will work right after installation. However, BeVigil, Github and Intelligence X require API keys to work, URLScan supports API key but not required. The API keys are stored in the $HOME/.hueristiq/xurlfind3r/config.yaml file - created upon first run - and uses the YAML format. Multiple API keys can be specified for each of these source from which one of them will be used.
Example config.yaml:
version: 0.2.0
sources:
- bevigil
- commoncrawl
- github
- intelx
- otx
- urlscan
- wayback
keys:
bevigil:
- awA5nvpKU3N8ygkZ
github:
- d23a554bbc1aabb208c9acfbd2dd41ce7fc9db39
- asdsd54bbc1aabb208c9acfbd2dd41ce7fc9db39
intelx:
- 2.intelx.io:00000000-0000-0000-0000-000000000000
urlscan:
- d4c85d34-e425-446e-d4ab-f5a3412acbe8To display help message for xurlfind3r use the -h flag:
xurlfind3r -hhelp message:
_ __ _ _ _____
__ ___ _ _ __| |/ _(_)_ __ __| |___ / _ __
\ \/ / | | | '__| | |_| | '_ \ / _` | |_ \| '__|
> <| |_| | | | | _| | | | | (_| |___) | |
/_/\_\\__,_|_| |_|_| |_|_| |_|\__,_|____/|_| v0.2.0
USAGE:
xurlfind3r [OPTIONS]
TARGET:
-d, --domain string (sub)domain to match URLs
SCOPE:
--include-subdomains bool match subdomain's URLs
SOURCES:
-s, --sources bool list sources
-u, --use-sources string sources to use (default: bevigil,commoncrawl,github,intelx,otx,urlscan,wayback)
--skip-wayback-robots bool with wayback, skip parsing robots.txt snapshots
--skip-wayback-source bool with wayback , skip parsing source code snapshots
FILTER & MATCH:
-f, --filter string regex to filter URLs
-m, --match string regex to match URLs
OUTPUT:
--no-color bool no color mode
-o, --output string output URLs file path
-v, --verbosity string debug, info, warning, error, fatal or silent (default: info)
CONFIGURATION:
-c, --configuration string configuration file path (default: ~/.hueristiq/xurlfind3r/config.yaml)
xurlfind3r -d hackerone.com --include-subdomains# filter images
xurlfind3r -d hackerone.com --include-subdomains -f '`^https?://[^/]*?/.*\.(jpg|jpeg|png|gif|bmp)(\?[^\s]*)?$`'# match js URLs
xurlfind3r -d hackerone.com --include-subdomains -m '^https?://[^/]*?/.*\.js(\?[^\s]*)?$'Issues and Pull Requests are welcome! Check out the contribution guidelines.
This utility is distributed under the MIT license.
1. git clone https://github.com/machine1337/TelegramRAT.git
2. Now Follow the instructions in HOW TO USE Section.
1. Go to Telegram and search for https://t.me/BotFather
2. Create Bot and get the API_TOKEN
3. Now search for https://t.me/chatIDrobot and get the chat_id
4. Now Go to client.py and go to line 16 and 17 and place API_TOKEN and chat_id there
5. Now run python client.py For Windows and python3 client.py For Linux
6. Now Go to the bot which u created and send command in message field
HELP MENU: Coded By Machine1337
CMD Commands | Execute cmd commands directly in bot
cd .. | Change the current directory
cd foldername | Change to current folder
download filename | Download File From Target
screenshot | Capture Screenshot
info | Get System Info
location | Get Target Location
1. Execute Shell Commands in bot directly.
2. download file from client.
3. Get Client System Information.
4. Get Client Location Information.
5. Capture Screenshot
6. More features will be added
Coded By: Machine1337
Contact: https://t.me/R0ot1337
python3 based multi clients reverse shell.
1. Don't Upload Any Payloads To VirusTotal.com Bcz This tool will not work
with Time.
2. Virustotal Share Signatures With AV Comapnies.
3. Again Don't be an Idiot!
1. git clone https://github.com/machine1337/pyFUD
2. python3 server.py (enter your ip,port and start the server)
3. client.py (Edit IP AND PORT To Put Your Own IP,Port)
1. python3 server.py
2. Now Compile client.py to exe (make sure change ip and port in it)
1. Very Simple And Fully Undectable Reverse Shell
2. Multi Client Handling
3. Persistent Shell
3. auto-reconnect
5. U can Convert client.py to exe using pyinstaller tool in windows.
Use this tool Only for Educational Purpose And I will Not be Responsible For ur cruel act.
Handle hijacking is a technique used in Windows operating systems to gain access to resources and resources of a system without permission. It is a type of privilege escalation attack in which a malicious user takes control of an object handle, which is an identifier that is used to reference a system object, such as a file, a directory, a process, or an event. This allows the malicious user to gain access to resources that should be inaccessible to them.
Handle hijacking is a serious threat to system security as it allows a malicious user to access resources and data that should otherwise be protected. It can also be used to inject code into a vulnerable system, allowing the attacker to gain access to information and resources.
Handle hijacking techniques are becoming increasingly prevalent as hackers develop more sophisticated methods of exploiting vulnerabilities in Windows systems. As such, it is important that system administrators understand the risks associated with handle hijacking and take proactive measures to protect their systems.
To perform a handle hijacking attack, an attacker must first identify a handle that is being used by a legitimate process and that they want to access. This can be done using various techniques, such as scanning the handle table of a process, monitoring handle creation events, or using a tool that can enumerate handles on the system ,Once the attacker has identified the handle they want to access, they can use the DuplicateHandle function to create a copy of the handle with their own process. This function takes the following parameters:
hSourceProcessHandle: A handle to the process that contains the source handle.hSourceHandle: A handle to the object to duplicate.hTargetProcessHandle: A handle to the process that is to receive the duplicated handle.lpTargetHandle: A pointer to a variable that receives the handle value.dwDesiredAccess: The access rights for the duplicated handle.bInheritHandle: A value that specifies whether the handle is inheritable.dwOptions: Additional options for the handle duplication.The DuplicateHandle function will create a new handle with the specified access rights and options, and return it in the lpTargetHandle parameter. The attacker can then use this handle to access the resource that it represents, allowing them to perform actions on the resource that they would not normally be able to do.
Acheron is a library inspired by SysWhisper3/FreshyCalls/RecycledGate, with most of the functionality implemented in Go assembly.
acheron package can be used to add indirect syscall capabilities to your Golang tradecraft, to bypass AV/EDRs that makes use of usermode hooks and instrumentation callbacks to detect anomalous syscalls that don't return to ntdll.dll, when the call transition back from kernel->userland.
The following steps are performed when creating a new syscall proxy instance:
Zw* functionsyscall;ret gadgets in ntdll.dll, to be used as trampolinesIntegrating acheron into your offsec tools is pretty easy. You can install the package with:
go get -u github.com/f1zm0/acheronThen just need to call acheron.New() to create a syscall proxy instance and use acheron.Syscall() to make an indirect syscall for Nt* APIs.
Minimal example:
package main
import (
"fmt"
"unsafe"
"github.com/f1zm0/acheron"
)
func main() {
var (
baseAddr uintptr
hSelf = uintptr(0xffffffffffffffff)
)
// creates Acheron instance, resolves SSNs, collects clean trampolines in ntdll.dlll, etc.
ach, err := acheron.New()
if err != nil {
panic(err)
}
// indirect syscall for NtAllocateVirtualMemory
s1 := ach.HashString("NtAllocateVirtualMemory")
if retcode, err := ach.Syscall(
s1, // function name hash
hSelf, // arg1: _In_ HANDLE ProcessHandle,
uintptr(unsafe.Pointer(&baseAddr)), // arg2: _Inout_ PVOID *BaseAddress,
uintptr(unsafe.Pointer(nil)), // arg3: _In_ ULONG_PTR ZeroBits,
0x1000, // arg4: _Inout_ PSIZE_T RegionSize,
windows.MEM_COMMIT|windows.MEM_RESERVE, // arg5: _In_ ULONG AllocationType,
windows.PAGE_EXECUTE_READWRITE, // arg6: _In_ ULONG Protect
); err != nil {
panic(err)
}
fmt.Printf(
"allocated memory with NtAllocateVirtualMemory (status: 0x%x)\n",
retcode,
)
// ...
}The following examples are included in the repository:
| Example | Description |
|---|---|
| sc_inject | Extremely simple process injection PoC, with support for both direct and indirect syscalls |
| process_snapshot | Using indirect syscalls to take process snapshots with syscalls |
| custom_hashfunc | Example of custom encoding/hashing function that can be used with acheron |
Other projects that use acheron:
Contributions are welcome! Below are some of the things that it would be nice to have in the future:
If you have any suggestions or ideas, feel free to open an issue or a PR.
The name is a reference to the Acheron river in Greek mythology, which is the river where souls of the dead are carried to the underworld.
Note
This project uses semantic versioning. Minor and patch releases should not break compatibility with previous versions. Major releases will only be used for major changes that break compatibility with previous versions.
Warning
This project has been created for educational purposes only. Don't use it to on systems you don't own. The developer of this project is not responsible for any damage caused by the improper usage of the library.
This project is licensed under the MIT License - see the LICENSE file for details
Hades is a proof of concept loader that combines several evasion technques with the aim of bypassing the defensive mechanisms commonly used by modern AV/EDRs.
The easiest way, is probably building the project on Linux using make.
git clone https://github.com/f1zm0/hades && cd hades
makeThen you can bring the executable to a x64 Windows host and run it with .\hades.exe [options].
PS > .\hades.exe -h
'||' '||' | '||''|. '||''''| .|'''.|
|| || ||| || || || . ||.. '
||''''|| | || || || ||''| ''|||.
|| || .''''|. || || || . '||
.||. .||. .|. .||. .||...|' .||.....| |'....|'
version: dev [11/01/23] :: @f1zm0
Usage:
hades -f <filepath> [-t selfthread|remotethread|queueuserapc]
Options:
-f, --file <str> shellcode file path (.bin)
-t, --technique <str> injection technique [selfthread, remotethread, queueuserapc]
Inject shellcode that spawms calc.exe with queueuserapc technique:
.\hades.exe -f calc.bin -t queueuserapc
User-mode hooking bypass with syscall RVA sorting (NtQueueApcThread hooked with frida-trace and custom handler)
Instrumentation callback bypass with indirect syscalls (injected DLL is from syscall-detect by jackullrich)
In the latest release, direct syscall capabilities have been replaced by indirect syscalls provided by acheron. If for some reason you want to use the previous version of the loader that used direct syscalls, you need to explicitly pass the direct_syscalls tag to the compiler, which will figure out what files needs to be included and excluded from the build.
GOOS=windows GOARCH=amd64 go build -ldflags "-s -w" -tags='direct_syscalls' -o dist/hades_directsys.exe cmd/hades/main.go
Warning
This project has been created for educational purposes only, to experiment with malware dev in Go, and learn more about the unsafe package and the weird Go Assembly syntax. Don't use it to on systems you don't own. The developer of this project is not responsible for any damage caused by the improper use of this tool.
Shoutout to the following people that shared their knowledge and code that inspired this tool:
This project is licensed under the GPLv3 License - see the LICENSE file for details
TLDHunt is a command-line tool designed to help users find available domain names for their online projects or businesses. By providing a keyword and a list of TLD (top-level domain) extensions, TLDHunt checks the availability of domain names that match the given criteria. This tool is particularly useful for those who want to quickly find a domain name that is not already taken, without having to perform a manual search on a domain registrar website.
For red teaming or phishing purposes, this tool can help you to find similar domains with different extensions from the original domain.
This tool is written in Bash and the only dependency required is whois. Therefore, make sure that you have installed whois on your system. In Debian, you can install whois using the following command:
sudo apt install whois -y
To detect whether a domain is registered or not, we search for the words "Name Server" in the output of the WHOIS command, as this is a signature of a registered domain. If you have a better signature or detection method, please feel free to submit a pull request.
You can use your custom tlds.txt list, but make sure that it is formatted like this:
.aero
.asia
.biz
.cat
.com
.coop
.info
.int
.jobs
.mobi
Γ’ΕΎΕ TLDHunt ./tldhunt.sh
_____ _ ___ _ _ _
|_ _| | | \| || |_ _ _ _| |_
| | | |__| |) | __ | || | ' \ _|
|_| |____|___/|_||_|\_,_|_||_\__|
Domain Availability Checker
Keyword is required.
Usage: ./tldhunt.sh -k <keyword> [-e <tld> | -E <exts>] [-x]
Example: ./tldhunt.sh -k linuxsec -E tlds.txt
Example of TLDHunt usage:
./tldhunt.sh -k linuxsec -E tlds.txt
You can add -x flag to print only Not Registered domain. Example:
./tldhunt.sh -k linuxsec -E tlds.txt -x
Nimbo-C2 is yet another (simple and lightweight) C2 framework.
Nimbo-C2 agent supports x64 Windows & Linux. It's written in Nim, with some usage of .NET on Windows (by dynamically loading the CLR to the process). Nim is powerful, but interacting with Windows is much easier and robust using Powershell, hence this combination is made. The Linux agent is slimer and capable only of basic commands, including ELF loading using the memfd technique.
All server components are written in Python:
My work wouldn't be possible without the previous great work done by others, listed under credits.
UPX0, UPX1) to make detection and unpacking harder.config.jsonc).cd ingit clone https://github.com/itaymigdal/Nimbo-C2
cd Nimbo-C2
docker build -t nimbo-dependencies .
cd again into the source files and run the docker image interactively, expose port 80 and mount Nimbo-C2 directory to the container (so you can easily access all project files, modify config.jsonc, download and upload files from agents, etc.). For Linux replace ${pwd} with $(pwd).cd Nimbo-C2
docker run -it --rm -p 80:80 -v ${pwd}:/Nimbo-C2 -w /Nimbo-C2 nimbo-dependencies
git clone https://github.com/itaymigdal/Nimbo-C2
cd Nimbo-C2/Nimbo-C2
docker run -it --rm -p 80:80 -v ${pwd}:/Nimbo-C2 -w /Nimbo-C2 itaymigdal/nimbo-dependencies
First, edit config.jsonc for your needs.
Then run with: python3 Nimbo-C2.py
Use the help command for each screen, and tab completion.
Also, check the examples directory.
Nimbo-C2 > help
--== Agent ==--
agent list -> list active agents
agent interact <agent-id> -> interact with the agent
agent remove <agent-id> -> remove agent data
--== Builder ==--
build exe -> build exe agent (-h for help)
build dll -> build dll agent (-h for help)
build elf -> build elf agent (-h for help)
--== Listener ==--
listener start -> start the listener
listener stop -> stop the listener
listener status -> print the listener status
--== General ==--
cls -> clear the screen
help -> print this help message
exit -> exit Nimbo-C2
Nimbo-2 [d337c406] > help
--== Send Commands ==--
cmd <shell-command> -> execute a shell command
iex <powershell-scriptblock> -> execute in-memory powershell command
--== File Stuff ==--
download <remote-file> -> download a file from the agent (wrap path with quotes)
upload <loal-file> <remote-path> -> upload a file to the agent (wrap paths with quotes)
--== Discovery Stuff ==--
pstree -> show process tree
checksec -> check for security products
software -> check for installed software
--== Collection Stuff ==--
clipboard -> retrieve clipboard
screenshot -> retrieve screenshot
audio <record-time> -> record audio
--== Post Exploitation Stuff ==--
lsass <method> -> dump lsass.exe [methods: direct,comsvcs] (elevation required)
sam -> dump sam,security,system hives using reg.exe (elevation required)
shellc <raw-shellcode-file> <pid> -> inject shellcode to remote process
assembly <local-assembly> <args> -> execute .net assembly (pass all args as a single string using quotes)
warning: make sure the assembly doesn't call any exit function
--== Evasion Stuff ==--
unhook -> unhook ntdll.dll
amsi -> patch amsi out of the current process
etw -> patch etw out of the current process
--== Persistence Stuff ==--
persist run <command> <key-name> -> set run key (will try first hklm, then hkcu)
persist spe <command> <process-name> -> persist using silent process exit technique (elevation required)
--== Privesc Stuff ==--
uac fodhelper <command> <keep/die> -> elevate session using the fodhelper uac bypass technique
uac sdclt <command> <keep/die> -> elevate session using the sdclt uac bypass technique
--== Interaction stuff ==--
msgbox <title> <text> -> pop a message box (blocking! waits for enter press)
speak <text> -> speak using sapi.spvoice com interface
--== Communication Stuff ==--
sleep <sleep-time> <jitter-%> -> change sleep time interval and jitter
clear -> clear pending commands
collect -> recollect agent data
kill -> kill the agent (persistence will still take place)
--== General ==--
show -> show agent details
back -> back to main screen
cls -> clear the screen
help -> print this help message
exit -> exit Nimbo-C2
Nimbo-2 [51a33cb9] > help
--== Send Commands ==--
cmd <shell-command> -> execute a terminal command
--== File Stuff ==--
download <remote-file> -> download a file from the agent (wrap path with quotes)
upload <local-file> <remote-path> -> upload a file to the agent (wrap paths with quotes)
--== Post Exploitation Stuff ==--
memfd <mode> <elf-file> <commandline> -> load elf in-memory using the memfd_create syscall
implant mode: load the elf as a child process and return
task mode: load the elf as a child process, wait on it, and get its output when it's done
(pass the whole commandline as a single string using quotes)
--== Communication Stuff ==--
sleep <sleep-time> <jitter-%> -> change sleep time interval and jitter
clear -> clear pending commands
collect -> recollect agent data
kill -> kill the agent (persistence will still take place)
--== General ==--
show -> show agent details
back -> back to main screen
cls -> clear the screen
help -> print this help message
exit -> exit Nimbo-C2
assembly command, make sure your assembly doesn't call any exit function because it will kill the agent.shellc command may unexpectedly crash or change the injected process behavior, test the shellcode and the target process first.audio, lsass and sam commands temporarily save artifacts to disk before exfiltrate and delete them.persist commands should be done manually.uac commands. die flag may leave you with no active agent (if the unelevated agent thinks that the UAC bypass was successful, and it wasn't), keep should leave you with 2 active agents probing the C2, then you should manually kill the unelevated.msgbox is blocking, until the user will press the ok button.This software may be buggy or unstable in some use cases as it not being fully and constantly tested. Feel free to open issues, PR's, and contact me for any reason at (Gmail | Linkedin | Twitter).
