Login
This project will allow you run a portable access point on a Raspberry Pi making use of Docker containers.
Further reference and explanations:
https://fwhibbit.es/en/automatic-access-point-with-docker-and-raspberry-pi-zero-w
Tested on Raspberry Pi Zero W.
You can customize the network password and other configurations on files at confs/hostapd_confs/. You can also add your own hostapd configuration files here.
Add --rm for volatile containers.
FreshRSS docker run --name autowlan_open --cap-add=NET_ADMIN --network=host autowlan
docker run --name autowlan_wep --cap-add=NET_ADMIN --network=host -v $(pwd)/confs/hostapd_confs/wep.conf:/etc/hostapd/hostapd.conf autowlan
docker run --name autowlan_wpa2 --cap-add=NET_ADMIN --network=host -v $(pwd)/confs/hostapd_confs/wpa2.conf:/etc/hostapd/hostapd.conf autowlan
docker stop autowlan_{open|wep|wpa2}
docker-compose -f <fichero_yml> up
docker-compose -f <fichero_yml> up -d
docker-compose -f <fichero_yml> down
docker-compose -f <fichero_yml> logs
Pinecone is a WLAN networks auditing tool, suitable for red team usage. It is extensible via modules, and it is designed to be run in Debian-based operating systems. Pinecone is specially oriented to be used with a Raspberry Pi, as a portable wireless auditing box.
This tool is designed for educational and research purposes only. Only use it with explicit permission.
For running Pinecone, you need a Debian-based operating system (it has been tested on Raspbian, Raspberry Pi Desktop and Kali Linux). Pinecone has the following requirements:
apt-get install python3.apt-get install dnsmasq.apt-get install hostapd-wpe. If your distribution repository does not have a hostapd-wpe package, you can either try to install it using a Kali Linux repository pre-compiled package, or compile it from its source code.After installing the necessary packages, you can install the Python packages requirements for Pinecone using pip3 install -r requirements.txt in the project root folder.
For starting Pinecone, execute python3 pinecone.py from within the project root folder:
root@kali:~/pinecone# python pinecone.py
[i] Database file: ~/pinecone/db/database.sqlite
pinecone >
Pinecone is controlled via a Metasploit-like command-line interface. You can type help to get the list of available commands, or help 'command' to get more information about a specific command:
pinecone > help
Documented commands (type help <topic>):
========================================
alias help load pyscript set shortcuts use
edit history py quit shell unalias
Undocumented commands:
======================
back run stop
pinecone > help use
Usage: use module [-h]
Interact with the specified module.
positional arguments:
module module ID
optional arguments:
-h, --help show this help message and exit
Use the command use 'moduleID' to activate a Pinecone module. You can use Tab auto-completion to see the list of current loaded modules:
pinecone > use
attack/deauth daemon/hostapd-wpe report/db2json scripts/infrastructure/ap
daemon/dnsmasq discovery/recon scripts/attack/wpa_handshake
pinecone > use discovery/recon
pcn module(discovery/recon) >
Every module has options, that can be seen typing help run or run --help when a module is activated. Most modules have default values for their options (check them before running):
pcn module(discovery/recon) > help run
usage: run [-h] [-i INTERFACE]
optional arguments:
-h, --help show this help message and exit
-i INTERFACE, --iface INTERFACE
monitor mode capable WLAN interface (default: wlan0)
When a module is activated, you can use the run [options...] command to start its functionality. The modules provide feedback of their execution state:
pcn script(attack/wpa_handshake) > run -s TEST_SSID
[i] Sending 64 deauth frames to all clients from AP 00:11:22:33:44:55 on channel 1...
................................................................
Sent 64 packets.
[i] Monitoring for 10 secs on channel 1 WPA handshakes between all clients and AP 00:11:22:33:44:55...
If the module runs in background (for example, scripts/infrastructure/ap), you can stop it using the stop command when the module is running:
back command. You can also activate another module issuing the use command again. Shell commands may be executed with the command shell or the ! shortcut:
pinecone > !ls
LICENSE modules module_template.py pinecone pinecone.py README.md requirements.txt TODO.md
Currently, Pinecone reconnaissance SQLite database is stored in the db/ directory inside the project root folder. All the temporary files that Pinecone needs to use are stored in the tmp/ directory also under the project root folder.
Pinecone is a WLAN networks auditing tool, suitable for red team usage. It is extensible via modules, and it is designed to be run in Debian-based operating systems. Pinecone is specially oriented to be used with a Raspberry Pi, as a portable wireless auditing box.
This tool is designed for educational and research purposes only. Only use it with explicit permission.
For running Pinecone, you need a Debian-based operating system (it has been tested on Raspbian, Raspberry Pi Desktop and Kali Linux). Pinecone has the following requirements:
apt-get install python3.apt-get install dnsmasq.apt-get install hostapd-wpe. If your distribution repository does not have a hostapd-wpe package, you can either try to install it using a Kali Linux repository pre-compiled package, or compile it from its source code.After installing the necessary packages, you can install the Python packages requirements for Pinecone using pip3 install -r requirements.txt in the project root folder.
For starting Pinecone, execute python3 pinecone.py from within the project root folder:
root@kali:~/pinecone# python pinecone.py
[i] Database file: ~/pinecone/db/database.sqlite
pinecone >
Pinecone is controlled via a Metasploit-like command-line interface. You can type help to get the list of available commands, or help 'command' to get more information about a specific command:
pinecone > help
Documented commands (type help <topic>):
========================================
alias help load pyscript set shortcuts use
edit history py quit shell unalias
Undocumented commands:
======================
back run stop
pinecone > help use
Usage: use module [-h]
Interact with the specified module.
positional arguments:
module module ID
optional arguments:
-h, --help show this help message and exit
Use the command use 'moduleID' to activate a Pinecone module. You can use Tab auto-completion to see the list of current loaded modules:
pinecone > use
attack/deauth daemon/hostapd-wpe report/db2json scripts/infrastructure/ap
daemon/dnsmasq discovery/recon scripts/attack/wpa_handshake
pinecone > use discovery/recon
pcn module(discovery/recon) >
Every module has options, that can be seen typing help run or run --help when a module is activated. Most modules have default values for their options (check them before running):
pcn module(discovery/recon) > help run
usage: run [-h] [-i INTERFACE]
optional arguments:
-h, --help show this help message and exit
-i INTERFACE, --iface INTERFACE
monitor mode capable WLAN interface (default: wlan0)
When a module is activated, you can use the run [options...] command to start its functionality. The modules provide feedback of their execution state:
pcn script(attack/wpa_handshake) > run -s TEST_SSID
[i] Sending 64 deauth frames to all clients from AP 00:11:22:33:44:55 on channel 1...
................................................................
Sent 64 packets.
[i] Monitoring for 10 secs on channel 1 WPA handshakes between all clients and AP 00:11:22:33:44:55...
If the module runs in background (for example, scripts/infrastructure/ap), you can stop it using the stop command when the module is running:
back command. You can also activate another module issuing the use command again. Shell commands may be executed with the command shell or the ! shortcut:
pinecone > !ls
LICENSE modules module_template.py pinecone pinecone.py README.md requirements.txt TODO.md
Currently, Pinecone reconnaissance SQLite database is stored in the db/ directory inside the project root folder. All the temporary files that Pinecone needs to use are stored in the tmp/ directory also under the project root folder.
