Secator - The Pentester'S Swiss Knife

secator is a task and workflow runner used for security assessments. It supports dozens of well-known security tools and it is designed to improve productivity for pentesters and security researchers.

Features

• Curated list of commands

• Unified input options

• Unified output schema

• CLI and library usage

• Distributed options with Celery

• Complexity from simple tasks to complex workflows

• Customizable

Supported tools

secator integrates the following tools:

Feel free to request new tools to be added by opening an issue, but please check that the tool complies with our selection criterias before doing so. If it doesn't but you still want to integrate it into secator, you can plug it in (see the dev guide).

Installation

Installing secator

pipx install secator

pip install secator

wget -O - https://raw.githubusercontent.com/freelabz/secator/main/scripts/install.sh | sh

docker run -it --rm --net=host -v ~/.secator:/root/.secator freelabz/secator --help

alias secator="docker run -it --rm --net=host -v ~/.secator:/root/.secator freelabz/secator"

secator --help

git clone https://github.com/freelabz/secator
cd secator
docker-compose up -d
docker-compose exec secator secator --help

Note: If you chose the Bash, Docker or Docker Compose installation methods, you can skip the next sections and go straight to Usage.

Installing languages

secator uses external tools, so you might need to install languages used by those tools assuming they are not already installed on your system.

We provide utilities to install required languages if you don't manage them externally:

secator install langs go

secator install langs ruby

Installing tools

secator does not install any of the external tools it supports by default.

We provide utilities to install or update each supported tool which should work on all systems supporting apt:

secator install tools

secator install tools <TOOL_NAME>

secator install tools httpx

Please make sure you are using the latest available versions for each tool before you run secator or you might run into parsing / formatting issues.

Installing addons

secator comes installed with the minimum amount of dependencies.

There are several addons available for secator:

secator install addons worker

secator install addons google

secator install addons mongodb

secator install addons redis

secator install addons dev

secator install addons trace

secator install addons build

Install CVEs

secator makes remote API calls to https://cve.circl.lu/ to get in-depth information about the CVEs it encounters. We provide a subcommand to download all known CVEs locally so that future lookups are made from disk instead:

secator install cves

Checking installation health

To figure out which languages or tools are installed on your system (along with their version):

secator health

Usage

secator --help

Usage examples

Run a fuzzing task (ffuf):

secator x ffuf http://testphp.vulnweb.com/FUZZ

Run a url crawl workflow:

secator w url_crawl http://testphp.vulnweb.com

Run a host scan:

secator s host mydomain.com

and more... to list all tasks / workflows / scans that you can use:

secator x --help
secator w --help
secator s --help

Learn more

To go deeper with secator, check out: * Our complete documentation * Our getting started tutorial video * Our Medium post * Follow us on social media: @freelabz on Twitter and @FreeLabz on YouTube

When is One Vulnerability Scanner Not Enough?

Artemis - A Modular Web Reconnaissance Tool And Vulnerability Scanner

A modular web reconnaissance tool and vulnerability scanner based on Karton (https://github.com/CERT-Polska/karton).

The Artemis project has been initiated by the KN Cyber science club of Warsaw University of Technology and is currently being maintained by CERT Polska.

Artemis is experimental software, under active development - use at your own risk.

Features

For an up-to-date list of features, please refer to the documentation.

Development

Tests

To run the tests, use:

./scripts/test

Code formatting

Artemis uses pre-commit to run linters and format the code. pre-commit is executed on CI to verify that the code is formatted properly.

To run it locally, use:

pre-commit run --all-files

To setup pre-commit so that it runs before each commit, use:

pre-commit install

Building the docs

To build the documentation, use:

cd docs
python3 -m venv venv
. venv/bin/activate
pip install -r requirements.txt
make html

How do I write my own module?

Please refer to the documentation.

Contributing

Contributions are welcome! We will appreciate both ideas for new Artemis modules (added as GitHub issues) as well as pull requests with new modules or code improvements.

However obvious it may seem we kindly remind you that by contributing to Artemis you agree that the BSD 3-Clause License shall apply to your input automatically, without the need for any additional declarations to be made.

Scanner-and-Patcher - A Web Vulnerability Scanner And Patcher

This tools is very helpful for finding vulnerabilities present in the Web Applications.

• A web application scanner explores a web application by crawling through its web pages and examines it for security vulnerabilities, which involves generation of malicious inputs and evaluation of application's responses.
• These scanners are automated tools that scan web applications to look for security vulnerabilities. They test web applications for common security problems such as cross-site scripting (XSS), SQL injection, and cross-site request forgery (CSRF).
• This scanner uses different tools like nmap, dnswalk, dnsrecon, dnsenum, dnsmap etc in order to scan ports, sites, hosts and network to find vulnerabilites like OpenSSL CCS Injection, Slowloris, Denial of Service, etc.

Tools Used

Working

Phase 1

• User has to write:- "python3 web_scan.py (https or http) ://example.com"
• At first program will note initial time of running, then it will make url with "www.example.com".
• After this step system will check the internet connection using ping.
• Functionalities:-
• To navigate to helper menu write this command:- --help for update --update
• If user want to skip current scan/test:- CTRL+C
• To quit the scanner use:- CTRL+Z
• The program will tell scanning time taken by the tool for a specific test.

Phase 2

• From here the main function of scanner will start:
• The scanner will automatically select any tool to start scanning.
• Scanners that will be used and filename rotation (default: enabled (1)
• Command that is used to initiate the tool (with parameters and extra params) already given in code
• After founding vulnerability in web application scanner will classify vulnerability in specific format:-
• [Responses + Severity (c - critical | h - high | m - medium | l - low | i - informational) + Reference for Vulnerability Definition and Remediation]
• Here c or critical defines most vulnerability wheres l or low is for least vulnerable system

Definitions:-

• Critical:- Vulnerabilities that score in the critical range usually have most of the following characteristics: Exploitation of the vulnerability likely results in root-level compromise of servers or infrastructure devices.Exploitation is usually straightforward, in the sense that the attacker does not need any special authentication credentials or knowledge about individual victims, and does not need to persuade a target user, for example via social engineering, into performing any special functions.

• High:- An attacker can fully compromise the confidentiality, integrity or availability, of a target system without specialized access, user interaction or circumstances that are beyond the attacker’s control. Very likely to allow lateral movement and escalation of attack to other systems on the internal network of the vulnerable application. The vulnerability is difficult to exploit. Exploitation could result in elevated privileges. Exploitation could result in a significant data loss or downtime.

• Medium:- An attacker can partially compromise the confidentiality, integrity, or availability of a target system. Specialized access, user interaction, or circumstances that are beyond the attacker’s control may be required for an attack to succeed. Very likely to be used in conjunction with other vulnerabilities to escalate an attack.Vulnerabilities that require the attacker to manipulate individual victims via social engineering tactics. Denial of service vulnerabilities that are difficult to set up. Exploits that require an attacker to reside on the same local network as the victim. Vulnerabilities where exploitation provides only very limited access. Vulnerabilities that require user privileges for successful exploitation.

• Low:- An attacker has limited scope to compromise the confidentiality, integrity, or availability of a target system. Specialized access, user interaction, or circumstances that are beyond the attacker’s control is required for an attack to succeed. Needs to be used in conjunction with other vulnerabilities to escalate an attack.

• Info:- An attacker can obtain information about the web site. This is not necessarily a vulnerability, but any information which an attacker obtains might be used to more accurately craft an attack at a later date. Recommended to restrict as far as possible any information disclosure.

• CVSS V3 SCORE RANGE	SEVERITY IN ADVISORY
  0.1 - 3.9	Low
  4.0 - 6.9	Medium
  7.0 - 8.9	High
  9.0 - 10.0	Critical

Vulnerabilities

• After this scanner will show results which inclues:
• Response time
• Total time for scanning
• Class of vulnerability

Remediation

• Now, Scanner will tell about harmful effects of that specific type vulnerabilility.
• Scanner tell about sources to know more about the vulnerabilities. (websites).
• After this step, scanner suggests some remdies to overcome the vulnerabilites.

Phase 3

• Scanner will Generate a proper report including
• Total number of vulnerabilities scanned
• Total number of vulnerabilities skipped
• Total number of vulnerabilities detected
• Time taken for total scan
• Details about each and every vulnerabilites.
• Writing all scan files output into SA-Debug-ScanLog for debugging purposes under the same directory
• For Debugging Purposes, You can view the complete output generated by all the tools named SA-Debug-ScanLog.

Use

Use Program as python3 web_scan.py (https or http) ://example.com

--help
--update

Installation

git clone https://github.com/Malwareman007/Scanner-and-Patcher.git
cd Scanner-and-Patcher/setup
python3 -m pip install --no-cache-dir -r requirements.txt

Screenshots of Scanner

Contributions

Template contributions , Feature Requests and Bug Reports are more than welcome.

Authors

Contributing

Contributions, issues and feature requests are welcome!
Feel free to check issues page.

UDPX - Fast A nd Lightweight, UDPX Is A Single-Packet UDP Scanner Written In Go That Supports The Discovery Of Over 45 Services With The Ability To Add Custom Ones

Fast and lightweight, UDPX is a single-packet UDP scanner written in Go that supports the discovery of over 45 services with the ability to add custom ones. It is easy to use and portable, and can be run on Linux, Mac OS, and Windows. Unlike internet-wide scanners like zgrab2 and zmap, UDPX is designed for portability and ease of use.

• It is fast. It can scan whole /16 network in ~20 seconds for a single service.
• You don't need to instal libpcap or any other dependencies.
• Can run on Linux, Mac Os, Windows. Or your Nethunter if you built it for Arm.
• Customizable. You can add your probes and test for even more protocols.
• Stores results in JSONL format.
• Scans also domain names.

How it works

Scanning UDP ports is very different than scanning TCP - you may, or may not get any result back from probing an UDP port as UDP is a connectionless protocol. UDPX implements a single-packet based approach. A protocol-specific packet is sent to the defined service (port) and waits for a response. The limit is set to 500 ms by default and can be changed by -w flag. If the service sends a packet back within this time, it is certain that it is indeed listening on that port and is reported as open.

A typical technique is to send 0 byte UDP packets to each port on the target machine. If we receive an "ICMP Port Unreachable" message, then the port is closed. If an UDP response is received to the probe (unusual), the port is open. If we get no response at all, the state is open or filtered, meaning that the port is either open or packet filters are blocking the communication. This method is not implemented as there is no added value (UDPX tests only for specific protocols).

Usage

Concurrency: By default, concurrency is set to 32 connections only (so you don't crash anything). If you have a lot of hosts to scan, you can set it to 128 or 256 connections. Based on your hardware, connection stability, and ulimit (on *nix), you can run 512 or more concurrent connections, but this is not recommended.

To scan a single IP:

udpx -t 1.1.1.1

To scan a CIDR with maximum of 128 connections and timeout of 1000 ms:

udpx -t 1.2.3.4/24 -c 128 -w 1000

To scan targets from file with maximum of 128 connections for only specific service:

udpx -tf targets.txt -c 128 -s ipmi

Target can be:

• IP address
• CIDR
• Domain

IPv6 is supported.

If you want to store the results, use flag -o [filename]. Output is in JSONL format, as can be seen bellow:

{"address":"45.33.32.156","hostname":"scanme.nmap.org","port":123,"service":"ntp","response_data":"JAME6QAAAEoAAA56LU9vp+d2ZPwOYIyDxU8jS3GxUvM="}

Options

        __  ______  ____ _  __
       / / / / __ \/ __ \ |/ /
      / / / / / / / /_/ /   /
     / /_/ / /_/ / ____/   |
     \____/_____/_/   /_/|_|
         v1.0.2-beta, by @nullt3r

Usage of ./udpx-linux-amd64:
  -c int
    	Maximum number of concurrent connections (default 32)
  -nr
    	Do not randomize addresses
  -o string
    	Output file to write results
  -s string
    	Scan only for a specific service, one of: ard, bacnet, bacnet_rpm, chargen, citrix, coap, db, db, digi1, digi2, digi3, dns, ipmi, ldap, mdns, memcache, mssql, nat_port_mapping, natpmp, netbios, netis, ntp, ntp_monlist, openvpn, pca_nq, pca_st, pcanywhere, portmap, qotd, rdp, ripv, sentinel, sip, snmp1, snmp2, snmp3, ssdp, tftp, ubiquiti, ubiquiti_discovery_v1, ubiquiti_discovery_v2, upnp, valve, wdbrpc, wsd, wsd_malformed, xdmcp, kerberos, ike
  -sp
    	Show received packets (only first 32 bytes)
  -t string
       	IP/CIDR to scan
  -tf string
    	File containing IPs/CIDRs to scan
  -w int
    	Maximum time to wait for a response (socket timeout) in ms (default 500)

Building

You can grab prebuilt binaries in the release section. If you want to build UDPX from source, follow these steps:

From git:

git clone https://github.com/nullt3r/udpx
cd udpx
go build ./cmd/udpx

You can find the binary in the current directory.

Or via go:

go install -v github.com/nullt3r/udpx/cmd/udpx@latest

After that, you can find the binary in $HOME/go/bin/udpx. If you want, move binary to /usr/local/bin/ so you can call it directly.

Supported services

The UDPX supports more then 45 services. The most interesting are:

• ipmi
• snmp
• ike
• tftp
• openvpn
• kerberos
• ldap

The complete list of supported services:

• ard
• bacnet
• bacnet_rpm
• chargen
• citrix
• coap
• db
• db
• digi1
• digi2
• digi3
• dns
• ipmi
• ldap
• mdns
• memcache
• mssql
• nat_port_mapping
• natpmp
• netbios
• netis
• ntp
• ntp_monlist
• openvpn
• pca_nq
• pca_st
• pcanywhere
• portmap
• qotd
• rdp
• ripv
• sentinel
• sip
• snmp1
• snmp2
• snmp3
• ssdp
• tftp
• ubiquiti
• ubiquiti_discovery_v1
• ubiquiti_discovery_v2
• upnp
• valve
• wdbrpc
• wsd
• wsd_malformed
• xdmcp
• kerberos
• ike

How to add your own probe?

Please send a feature request with protocol name and port and I will make it happen. Or add it on your own, the file pkg/probes/probes.go contains all available payloads. Specify the protocol name, port and packet data (hex-encoded).

{
        Name: "ike",
        Payloads: []string{"5b5e64c03e99b51100000000000000000110020000000000000001500000013400000001000000010000012801010008030000240101"},
        Port: []int{500, 4500},
},

Credits

• Nmap
• UDP Hunter
• ZGrab2
• ZMap

Disclaimer

I am not responsible for any damages. You are responsible for your own actions. Scanning or attacking targets without prior mutual consent can be illegal.

License

UDPX is distributed under MIT License.

Scriptkiddi3 - Streamline Your Recon And Vulnerability Detection Process With SCRIPTKIDDI3, A Recon And Initial Vulnerability Detection Tool Built Using Shell Script And Open Source Tools

Streamline your recon and vulnerability detection process with SCRIPTKIDDI3, A recon and initial vulnerability detection tool built using shell script and open source tools.

How it works • Installation • Usage • MODES • For Developers • Credits

Introducing SCRIPTKIDDI3, a powerful recon and initial vulnerability detection tool for Bug Bounty Hunters. Built using a variety of open-source tools and a shell script, SCRIPTKIDDI3 allows you to quickly and efficiently run a scan on the target domain and identify potential vulnerabilities.

SCRIPTKIDDI3 begins by performing recon on the target system, collecting information such as subdomains, and running services with nuclei. It then uses this information to scan for known vulnerabilities and potential attack vectors, alerting you to any high-risk issues that may need to be addressed.

In addition, SCRIPTKIDDI3 also includes features for identifying misconfigurations and insecure default settings with nuclei templates, helping you ensure that your systems are properly configured and secure.

SCRIPTKIDDI3 is an essential tool for conducting thorough and effective recon and vulnerability assessments. Let's Find Bugs with SCRIPTKIDDI3

[Thanks ChatGPT for the Description]

How it Works ?

This tool mainly performs 3 tasks

1. Effective Subdomain Enumeration from Various Tools
2. Get URLs with open HTTP and HTTPS service.
3. Run a Nuclei and other scans on previous output So basically, this is an autmation script for your initial recon in bugbounty

Install SCRIPTKIDDI3

SCRIPTKIDDI3 requires different tools to run successfully. Run the following command to install the latest version with all requirments-

git clone https://github.com/thecyberneh/scriptkiddi3.git
cd scriptkiddi3
bash installer.sh

Usage

scriptkiddi3 -h

This will display help for the tool. Here are all the switches it supports.

[ABOUT:]
   Streamline your recon and vulnerability detection process with SCRIPTKIDDI3,
   A recon and initial vulnerability detection tool built using shell script and open source tools.


[Usage:]
   scriptkiddi3 [MODE] [FLAGS]
   scriptkiddi3 -m EXP -d target.com -c /path/to/config.yaml


[MODES:]
    ['-m'/'--mode']
         Available Options for MODE: 
         SUB | sub | SUBDOMAIN | subdomain           Run scriptkiddi3 in SUBDOMAIN ENUMERATION mode
         URL | url                                   Run scriptkiddi3 in URL ENUMERATION mode
         EXP | exp | EXPLOIT | exploit               Run scriptkiddi3 in Full Exploitation mode


         Feature of EXPLOI mode :                    subdomain enumaration, URL Enumeration,
                                                     Vulnerability Detection with Nuclei,
                                                     an   d Scan for SUBDOMAINE TAKEOVER

[FLAGS:]
    [TARGET:]   -d, --domain    target domain to scan

    [CONFIG:]   -c, --config    path of your configuration file for subfinder

    [HELP:]     -h, --help      to get help menu  

    [UPDATE:]   -u, --update    to update tool

[Examples:]
     Run scriptkiddi3 in full Exploitation mode
         scriptkiddi3 -m EXP -d target.com


     Use your own CONFIG file for subfinder
         scriptkiddi3 -m EXP -d target.com -c /path/to/config.yaml


     Run scriptkiddi3 in SUBDOMAIN ENUMERATION mode
         scriptkiddi3 -m SUB -d target.com


     Run scriptkiddi3 in URL ENUMERATION mode
         scriptkiddi3 -m SUB -d target.com

MODES

1. FULL EXPLOITATION MODE

Run SCRIPTKIDDI3 in FULL EXPLOITATION MODE

  scriptkiddi3 -m EXP -d target.com

FULL EXPLOITATION MODE contains following functions

• Effective Subdomain Enumeration with different services and open source tools
• Effective URL Enumeration ( HTTP and HTTPs service )
• Run Vulnerability Detection with Nuclei
• Subdomain Takeover Test on previous results

2. SUBDOMAIN ENUMERATION MODE

Run scriptkiddi3 in SUBDOMAIN ENUMERATION MODE

  scriptkiddi3 -m SUB -d target.com

SUBDOMAIN ENUMERATION MODE contains following functions

• Effective Subdomain Enumeration with different services and open source tools
• You can use this mode if you only want to get subdomains from this tool or we can say Automation of Subdmain Enumeration by different tools

3. URL ENUMERATION MODE

Run scriptkiddi3 in URL ENUMERATION MODE

  scriptkiddi3 -m URL -d target.com

URL ENUMERATION MODE contains following functions

• Same Feature as SUBDOMAIN ENUMERATION MODE but also identifies HTTP or HTTPS service

Using your own CONFIG File for subfinder

  scriptkiddi3 -m EXP -d target.com -c /path/to/config.yaml

You can also provie your own CONDIF file with your API Keys for subdomain enumeration with subfinder

Updating tool to latest version You can run following command to update tool

  scriptkiddi3 -u

An Example of config.yaml

binaryedge:
  - 0bf8919b-aab9-42e4-9574-d3b639324597
  - ac244e2f-b635-4581-878a-33f4e79a2c13
censys:
  - ac244e2f-b635-4581-878a-33f4e79a2c13:dd510d6e-1b6e-4655-83f6-f347b363def9
certspotter: []
passivetotal:
  - sample-email@user.com:sample_password
securitytrails: []
shodan:
  - AAAAClP1bJJSRMEYJazgwhJKrggRwKA
github:
  - ghp_lkyJGU3jv1xmwk4SDXavrLDJ4dl2pSJMzj4X
  - ghp_gkUuhkIYdQPj13ifH4KA3cXRn8JD2lqir2d4
zoomeye:
  - zoomeye_username:zoomeye_password

For Developers

If you have ideas for new functionality or modes that you would like to see in this tool, you can always submit a pull request (PR) to contribute your changes.

If you have any other queries, you can always contact me on Twitter(thecyberneh)

Credits

I would like to express my gratitude to all of the open source projects that have made this tool possible and have made recon tasks easier to accomplish.

Certwatcher - Tool For Capture And Tracking Certificate Transparency Logs, Using YAML Templates Based DSL

CertWatcher is a tool for capturing and tracking certificate transparency logs, using YAML templates. The tool helps detect and analyze websites using regular expression patterns and is designed for ease of use by security professionals and researchers.

Certwatcher continuously monitors the certificate data stream and checks for patterns or malicious activity. Certwatcher can also be customized to detect specific phishing, exposed tokens, secret api key patterns using regular expressions defined by YAML templates.

Get Started

Certwatcher allows you to use custom templates to display the certificate information. We have some public custom templates available from the community. You can find them in our repository.

Useful Links

• Documentation
• Install Certwatcher
• Templating Guide
• FAQ

Contribution

If you want to contribute to this project, follow the steps below:

• Fork this repository.
• Create a new branch with your feature: git checkout -b my-new-feature
• Make changes and commit the changes: git commit -m 'Adding a new feature'
• Push to the original branch: git push origin my-new-feature
• Open a pull request.

Authors

• @drfabiocastro
• @noexceptcpp

CertWatcher - A Tool For Capture And Tracking Certificate Transparency Logs, Using YAML Templates Based DSL

CertWatcher is a tool for capture and tracking certificate transparency logs, using YAML templates. The tool helps to detect and analyze phishing websites and regular expression patterns, and is designed to make it easy to use for security professionals and researchers.

Certwatcher continuously monitors the certificate data stream and checks for suspicious patterns or malicious activity. Certwatcher can also be customized to detect specific phishing patterns and combat the spread of malicious websites.

Get Started

Certwatcher allows you to use custom templates to display the certificate information. We have some public custom templates available from the community. You can find them in our repository.

Useful Links

• Documentation
• Install Certwatcher
• Templating Guide
• FAQ

Contribution

If you want to contribute to this project, follow the steps below:

• Fork this repository.
• Create a new branch with your feature: git checkout -b my-new-feature
• Make changes and commit the changes: git commit -m 'Adding a new feature'
• Push to the original branch: git push origin my-new-feature
• Open a pull request.

Authors

• @drfabiocastro
• @noexceptcpp