Login
Invisible protocol sniffer for finding vulnerabilities in the network. Designed for pentesters and security engineers.
FreshRSS Above: Invisible network protocol sniffer
Designed for pentesters and security engineers
Author: Magama Bazarov, <caster@exploit.org>
Pseudonym: Caster
Version: 2.6
Codename: Introvert
All information contained in this repository is provided for educational and research purposes only. The author is not responsible for any illegal use of this tool.
It is a specialized network security tool that helps both pentesters and security professionals.
Above is a invisible network sniffer for finding vulnerabilities in network equipment. It is based entirely on network traffic analysis, so it does not make any noise on the air. He's invisible. Completely based on the Scapy library.
Above allows pentesters to automate the process of finding vulnerabilities in network hardware. Discovery protocols, dynamic routing, 802.1Q, ICS Protocols, FHRP, STP, LLMNR/NBT-NS, etc.
Detects up to 27 protocols:
MACSec (802.1X AE)
EAPOL (Checking 802.1X versions)
ARP (Passive ARP, Host Discovery)
CDP (Cisco Discovery Protocol)
DTP (Dynamic Trunking Protocol)
LLDP (Link Layer Discovery Protocol)
802.1Q Tags (VLAN)
S7COMM (Siemens)
OMRON
TACACS+ (Terminal Access Controller Access Control System Plus)
ModbusTCP
STP (Spanning Tree Protocol)
OSPF (Open Shortest Path First)
EIGRP (Enhanced Interior Gateway Routing Protocol)
BGP (Border Gateway Protocol)
VRRP (Virtual Router Redundancy Protocol)
HSRP (Host Standby Redundancy Protocol)
GLBP (Gateway Load Balancing Protocol)
IGMP (Internet Group Management Protocol)
LLMNR (Link Local Multicast Name Resolution)
NBT-NS (NetBIOS Name Service)
MDNS (Multicast DNS)
DHCP (Dynamic Host Configuration Protocol)
DHCPv6 (Dynamic Host Configuration Protocol v6)
ICMPv6 (Internet Control Message Protocol v6)
SSDP (Simple Service Discovery Protocol)
MNDP (MikroTik Neighbor Discovery Protocol)
Above works in two modes:
The tool is very simple in its operation and is driven by arguments:
.pcap as input and looks for protocols in it.pcap file, its name you specify yourselfusage: above.py [-h] [--interface INTERFACE] [--timer TIMER] [--output OUTPUT] [--input INPUT] [--passive-arp]
options:
-h, --help show this help message and exit
--interface INTERFACE
Interface for traffic listening
--timer TIMER Time in seconds to capture packets, if not set capture runs indefinitely
--output OUTPUT File name where the traffic will be recorded
--input INPUT File name of the traffic dump
--passive-arp Passive ARP (Host Discovery)
The information obtained will be useful not only to the pentester, but also to the security engineer, he will know what he needs to pay attention to.
When Above detects a protocol, it outputs the necessary information to indicate the attack vector or security issue:
Impact: What kind of attack can be performed on this protocol;
Tools: What tool can be used to launch an attack;
Technical information: Required information for the pentester, sender MAC/IP addresses, FHRP group IDs, OSPF/EIGRP domains, etc.
Mitigation: Recommendations for fixing the security problems
Source/Destination Addresses: For protocols, Above displays information about the source and destination MAC addresses and IP addresses
You can install Above directly from the Kali Linux repositories
caster@kali:~$ sudo apt update && sudo apt install above
Or...
caster@kali:~$ sudo apt-get install python3-scapy python3-colorama python3-setuptools
caster@kali:~$ git clone https://github.com/casterbyte/Above
caster@kali:~$ cd Above/
caster@kali:~/Above$ sudo python3 setup.py install
# Install python3 first
brew install python3
# Then install required dependencies
sudo pip3 install scapy colorama setuptools
# Clone the repo
git clone https://github.com/casterbyte/Above
cd Above/
sudo python3 setup.py install
Don't forget to deactivate your firewall on macOS!
Above requires root access for sniffing
Above can be run with or without a timer:
caster@kali:~$ sudo above --interface eth0 --timer 120
To stop traffic sniffing, press CTRL + Π‘
WARNING! Above is not designed to work with tunnel interfaces (L3) due to the use of filters for L2 protocols. Tool on tunneled L3 interfaces may not work properly.
Example:
caster@kali:~$ sudo above --interface eth0 --timer 120
-----------------------------------------------------------------------------------------
[+] Start sniffing...
[*] After the protocol is detected - all necessary information about it will be displayed
--------------------------------------------------
[+] Detected SSDP Packet
[*] Attack Impact: Potential for UPnP Device Exploitation
[*] Tools: evil-ssdp
[*] SSDP Source IP: 192.168.0.251
[*] SSDP Source MAC: 02:10:de:64:f2:34
[*] Mitigation: Ensure UPnP is disabled on all devices unless absolutely necessary, monitor UPnP traffic
--------------------------------------------------
[+] Detected MDNS Packet
[*] Attack Impact: MDNS Spoofing, Credentials Interception
[*] Tools: Responder
[*] MDNS Spoofing works specifically against Windows machines
[*] You cannot get NetNTLMv2-SSP from Apple devices
[*] MDNS Speaker IP: fe80::183f:301c:27bd:543
[*] MDNS Speaker MAC: 02:10:de:64:f2:34
[*] Mitigation: Filter MDNS traffic. Be careful with MDNS filtering
--------------------------------------------------
If you need to record the sniffed traffic, use the --output argument
caster@kali:~$ sudo above --interface eth0 --timer 120 --output above.pcap
If you interrupt the tool with CTRL+C, the traffic is still written to the file
If you already have some recorded traffic, you can use the --input argument to look for potential security issues
caster@kali:~$ above --input ospf-md5.cap
Example:
caster@kali:~$ sudo above --input ospf-md5.cap
[+] Analyzing pcap file...
--------------------------------------------------
[+] Detected OSPF Packet
[+] Attack Impact: Subnets Discovery, Blackhole, Evil Twin
[*] Tools: Loki, Scapy, FRRouting
[*] OSPF Area ID: 0.0.0.0
[*] OSPF Neighbor IP: 10.0.0.1
[*] OSPF Neighbor MAC: 00:0c:29:dd:4c:54
[!] Authentication: MD5
[*] Tools for bruteforce: Ettercap, John the Ripper
[*] OSPF Key ID: 1
[*] Mitigation: Enable passive interfaces, use authentication
--------------------------------------------------
[+] Detected OSPF Packet
[+] Attack Impact: Subnets Discovery, Blackhole, Evil Twin
[*] Tools: Loki, Scapy, FRRouting
[*] OSPF Area ID: 0.0.0.0
[*] OSPF Neighbor IP: 192.168.0.2
[*] OSPF Neighbor MAC: 00:0c:29:43:7b:fb
[!] Authentication: MD5
[*] Tools for bruteforce: Ettercap, John the Ripper
[*] OSPF Key ID: 1
[*] Mitigation: Enable passive interfaces, use authentication
The tool can detect hosts without noise in the air by processing ARP frames in passive mode
caster@kali:~$ sudo above --interface eth0 --passive-arp --timer 10
[+] Host discovery using Passive ARP
--------------------------------------------------
[+] Detected ARP Reply
[*] ARP Reply for IP: 192.168.1.88
[*] MAC Address: 00:00:0c:07:ac:c8
--------------------------------------------------
[+] Detected ARP Reply
[*] ARP Reply for IP: 192.168.1.40
[*] MAC Address: 00:0c:29:c5:82:81
--------------------------------------------------
I wrote this tool because of the track "A View From Above (Remix)" by KOAN Sound. This track was everything to me when I was working on this sniffer.
The summary of the changelog since the 2023.4 release from December is:
Airgorah is a WiFi auditing software that can discover the clients connected to an access point, perform deauthentication attacks against specific clients or all the clients connected to it, capture WPA handshakes, and crack the password of the access point.
It is written in Rust and uses GTK4 for the graphical part. The software is mainly based on aircrack-ng tools suite.
β Don't forget to put a star if you like the project!
This software only works on linux and requires root privileges to run.
You will also need a wireless network card that supports monitor mode and packet injection.
The installation instructions are available here.
The documentation about the usage of the application is available here.
This project is released under MIT license.
If you have any question about the usage of the application, do not hesitate to open a discussion
If you want to report a bug or provide a feature, do not hesitate to open an issue or submit a pull request
MacMaster is a versatile command line tool designed to change the MAC address of network interfaces on your system. It provides a simple yet powerful solution for network anonymity and testing.
MacMaster requires Python 3.6 or later.
$ git clone https://github.com/HalilDeniz/MacMaster.gitcd MacMaster$ python setup.py install$ macmaster --help
usage: macmaster [-h] [--interface INTERFACE] [--version]
[--random | --newmac NEWMAC | --customoui CUSTOMOUI | --reset]
MacMaster: Mac Address Changer
options:
-h, --help show this help message and exit
--interface INTERFACE, -i INTERFACE
Network interface to change MAC address
--version, -V Show the version of the program
--random, -r Set a random MAC address
--newmac NEWMAC, -nm NEWMAC
Set a specific MAC address
--customoui CUSTOMOUI, -co CUSTOMOUI
Set a custom OUI for the MAC address
--reset, -rs Reset MAC address to the original value--interface, -i: Specify the network interface.--random, -r: Set a random MAC address.--newmac, -nm: Set a specific MAC address.--customoui, -co: Set a custom OUI for the MAC address.--reset, -rs: Reset MAC address to the original value.--version, -V: Show the version of the program.$ macmaster.py -i eth0 -nm 00:11:22:33:44:55$ macmaster.py -i eth0 -r$ macmaster.py -i eth0 -rs$ macmaster.py -i eth0 -co 08:00:27$ macmaster.py -VReplace eth0 with your desired network interface.
You must run this script as root or use sudo to run this script for it to work properly. This is because changing a MAC address requires root privileges.
Contributions are welcome! To contribute to MacMaster, follow these steps:
For any inquiries or further information, you can reach me through the following channels:
PacketSpy is a powerful network packet sniffing tool designed to capture and analyze network traffic. It provides a comprehensive set of features for inspecting HTTP requests and responses, viewing raw payload data, and gathering information about network devices. With PacketSpy, you can gain valuable insights into your network's communication patterns and troubleshoot network issues effectively.
git clone https://github.com/HalilDeniz/PacketSpy.git
PacketSpy requires the following dependencies to be installed:
pip install -r requirements.txt
To get started with PacketSpy, use the following command-line options:
root@denizhalil:/PacketSpy# python3 packetspy.py --help
usage: packetspy.py [-h] [-t TARGET_IP] [-g GATEWAY_IP] [-i INTERFACE] [-tf TARGET_FIND] [--ip-forward] [-m METHOD]
options:
-h, --help show this help message and exit
-t TARGET_IP, --target TARGET_IP
Target IP address
-g GATEWAY_IP, --gateway GATEWAY_IP
Gateway IP address
-i INTERFACE, --interface INTERFACE
Interface name
-tf TARGET_FIND, --targetfind TARGET_FIND
Target IP range to find
--ip-forward, -if Enable packet forwarding
-m METHOD, --method METHOD
Limit sniffing to a specific HTTP method
root@denizhalil:/PacketSpy# python3 packetspy.py -tf 10.0.2.0/24 -i eth0
Device discovery
**************************************
Ip Address Mac Address
**************************************
10.0.2.1 52:54:00:12:35:00
10.0.2.2 52:54:00:12:35:00
10.0.2.3 08:00:27:78:66:95
10.0.2.11 08:00:27:65:96:cd
10.0.2.12 08:00:27:2f:64:fe
root@denizhalil:/PacketSpy# python3 packetspy.py -t 10.0.2.11 -g 10.0.2.1 -i eth0
******************* started sniff *******************
HTTP Request:
Method: b'POST'
Host: b'testphp.vulnweb.com'
Path: b'/userinfo.php'
Source IP: 10.0.2.20
Source MAC: 08:00:27:04:e8:82
Protocol: HTTP
User-Agent: b'Mozilla/5.0 (X11; Linux x86_64; rv:105.0) Gecko/20100101 Firefox/105.0'
Raw Payload:
b'uname=admin&pass=mysecretpassword'
HTTP Response:
Status Code: b'302'
Content Type: b'text/html; charset=UTF-8'
--------------------------------------------------
Https work still in progress
Contributions are welcome! To contribute to PacketSpy, follow these steps:
If you have any questions, comments, or suggestions about PacketSpy, please feel free to contact me:
PacketSpy is released under the MIT License. See LICENSE for more information.
The summary of the changelog since the 2023.3 release from August is:
PassBreaker is a command-line password cracking tool developed in Python. It allows you to perform various password cracking techniques such as wordlist-based attacks and brute force attacks.Β
Clone the repository:
git clone https://github.com/HalilDeniz/PassBreaker.gitInstall the required dependencies:
pip install -r requirements.txtpython passbreaker.py <password_hash> <wordlist_file> [--algorithm]Replace <password_hash> with the target password hash and <wordlist_file> with the path to the wordlist file containing potential passwords.
--algorithm <algorithm>: Specify the hash algorithm to use (e.g., md5, sha256, sha512).-s, --salt <salt>: Specify a salt value to use.-p, --parallel: Enable parallel processing for faster cracking.-c, --complexity: Evaluate password complexity before cracking.-b, --brute-force: Perform a brute force attack.--min-length <min_length>: Set the minimum password length for brute force attacks.--max-length <max_length>: Set the maximum password length for brute force attacks.--character-set <character_set>: Set the character set to use for brute force attacks.Elbette! Δ°Εte Δ°ngilizce olarak yazΔ±lmΔ±Ε baΕlΔ±k ve küçük bir bilgi ile daha fazla kullanΔ±m ΓΆrneΔi:
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm md5This command attempts to crack the password with the hash value "5f4dcc3b5aa765d61d8327deb882cf99" using the MD5 algorithm and a wordlist from the "passwords.txt" file.
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 --brute-force --min-length 6 --max-length 8 --character-set abc123This command performs a brute force attack to crack the password with the hash value "5f4dcc3b5aa765d61d8327deb882cf99" by trying all possible combinations of passwords with a length between 6 and 8 characters, using the character set "abc123".
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm sha256 --complexityThis command evaluates the complexity of passwords in the "passwords.txt" file and attempts to crack the password with the hash value "5f4dcc3b5aa765d61d8327deb882cf99" using the SHA-256 algorithm. It only tries passwords that meet the complexity requirements.
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm md5 --salt mysalt123This command uses a specific salt value ("mysalt123") for the password cracking process. Salt is used to enhance the security of passwords.
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm sha512 --parallelThis command performs password cracking with parallel processing for faster cracking. It utilizes multiple processing cores, but it may consume more system resources.
These examples demonstrate different features and use cases of the "PassBreaker" password cracking tool. Users can customize the parameters based on their needs and goals.
This tool is intended for educational and ethical purposes only. Misuse of this tool for any malicious activities is strictly prohibited. The developers assume no liability and are not responsible for any misuse or damage caused by this tool.
Contributions are welcome! To contribute to PassBreaker, follow these steps:
If you have any questions, comments, or suggestions about PassBreaker, please feel free to contact me:
PassBreaker is released under the MIT License. See LICENSE for more information.
kalipm.sh is a powerful package management tool for Kali Linux that provides a user-friendly menu-based interface to simplify the installation of various packages and tools. It streamlines the process of managing software and enables users to effortlessly install packages from different categories.Β
apt-get package manager.To install KaliPm, you can simply clone the repository from GitHub:
git clone https://github.com/HalilDeniz/KaliPackergeManager.git
chmod +x kalipm.sh
./kalipm.sh
KaliPM.sh also includes an update feature to ensure your system is up to date. Simply select the "Update" option from the menu, and the script will run the necessary commands to clean, update, upgrade, and perform a full-upgrade on your system.
Contributions are welcome! To contribute to KaliPackergeManager, follow these steps:
If you have any questions, comments, or suggestions about Tool Name, please feel free to contact me:
The highlights of the changelog since the 2023.2 release from May:
The changelog highlights over the last few weeks since Marchβs release of 2023.1 is:
he changelog summary since the 2022.4 release from December:
IpGeo is a python tool to extract IP addresses from captured network traffic file (pcap/pcapng) and generate csv report containing details about the geolocation of each ip in the packets.
Use the package manager pip3 to install required modules.
pip3 install colorama
pip3 install requests
pip3 install pysharkIf you are not using Kali or ParrotOs or any other penetration distribution you need to install Tshark.
sudo apt install tsharkpython3 ipGeo.py
# then you will enter captured traffic file path
DNSRecon is a DNS scanning and enumeration tool written in Python, which allows you to perform different tasks, such as enumeration of standard records for a defined domain (A, NS, SOA, and MX). Top-level domain expansion for a defined domain.
With this graph-oriented user interface, the different records of a specific domain can be observed, classified and ordered in a simple way.
git clone https://github.com/micro-joan/dnsrecon-gui
cd dnsrecon-gui/
chmod +x run.sh
./run.sh
After executing the application launcher you need to have all the components installed, the launcher will check one by one, and in the case of not having any component installed it will show you the statement that you must enter to install it:
When the tool is ready to use the same installer will give you a URL that you must put in the browser in a private window so every time you do a search you will have to open a new window in private or clear your browser cache to refresh the graphics.
| Service | Functions | Status |
|---|---|---|
| Text2MindMap | Convert text to mindmap | β
Free |
| dnsenum | DNS information gathering | β
Free |
My website:Β https://microjoan.com
My blog:Β https://darkhacking.es/
Buy me a coffee:Β https://www.buymeacoffee.com/microjoan
ThisΒ toolkitΒ contains materials that can be potentially damaging or dangerous for social media. Refer to the laws in your province/country before accessing, using,or in any other way utilizing this in a wrong way.
This Tool is made for educational purposes only. Do not attempt to violate the law with anything contained here. If this is your intention, then Get the hell out of here!
A summary of the changelog since Augustβs 2022.3 release:
The highlights for Kaliβs 2022.3βs release:
For more details, see the bug tracker changelog.
