Login
As head of the Cisco Trust Office, Matt Fussa leads a global team that partners with government agencies, regulators, and customers to help shape cybersecurity regulation and manage cyber risk. He is⦠Read more on Cisco Blogs
MacMaster is a versatile command line tool designed to change the MAC address of network interfaces on your system. It provides a simple yet powerful solution for network anonymity and testing.
MacMaster requires Python 3.6 or later.
FreshRSS 
$ git clone https://github.com/HalilDeniz/MacMaster.gitcd MacMaster$ python setup.py install$ macmaster --help
usage: macmaster [-h] [--interface INTERFACE] [--version]
[--random | --newmac NEWMAC | --customoui CUSTOMOUI | --reset]
MacMaster: Mac Address Changer
options:
-h, --help show this help message and exit
--interface INTERFACE, -i INTERFACE
Network interface to change MAC address
--version, -V Show the version of the program
--random, -r Set a random MAC address
--newmac NEWMAC, -nm NEWMAC
Set a specific MAC address
--customoui CUSTOMOUI, -co CUSTOMOUI
Set a custom OUI for the MAC address
--reset, -rs Reset MAC address to the original value--interface, -i: Specify the network interface.--random, -r: Set a random MAC address.--newmac, -nm: Set a specific MAC address.--customoui, -co: Set a custom OUI for the MAC address.--reset, -rs: Reset MAC address to the original value.--version, -V: Show the version of the program.$ macmaster.py -i eth0 -nm 00:11:22:33:44:55$ macmaster.py -i eth0 -r$ macmaster.py -i eth0 -rs$ macmaster.py -i eth0 -co 08:00:27$ macmaster.py -VReplace eth0 with your desired network interface.
You must run this script as root or use sudo to run this script for it to work properly. This is because changing a MAC address requires root privileges.
Contributions are welcome! To contribute to MacMaster, follow these steps:
For any inquiries or further information, you can reach me through the following channels:
PacketSpy is a powerful network packet sniffing tool designed to capture and analyze network traffic. It provides a comprehensive set of features for inspecting HTTP requests and responses, viewing raw payload data, and gathering information about network devices. With PacketSpy, you can gain valuable insights into your network's communication patterns and troubleshoot network issues effectively.
git clone https://github.com/HalilDeniz/PacketSpy.git
PacketSpy requires the following dependencies to be installed:
pip install -r requirements.txt
To get started with PacketSpy, use the following command-line options:
root@denizhalil:/PacketSpy# python3 packetspy.py --help
usage: packetspy.py [-h] [-t TARGET_IP] [-g GATEWAY_IP] [-i INTERFACE] [-tf TARGET_FIND] [--ip-forward] [-m METHOD]
options:
-h, --help show this help message and exit
-t TARGET_IP, --target TARGET_IP
Target IP address
-g GATEWAY_IP, --gateway GATEWAY_IP
Gateway IP address
-i INTERFACE, --interface INTERFACE
Interface name
-tf TARGET_FIND, --targetfind TARGET_FIND
Target IP range to find
--ip-forward, -if Enable packet forwarding
-m METHOD, --method METHOD
Limit sniffing to a specific HTTP method
root@denizhalil:/PacketSpy# python3 packetspy.py -tf 10.0.2.0/24 -i eth0
Device discovery
**************************************
Ip Address Mac Address
**************************************
10.0.2.1 52:54:00:12:35:00
10.0.2.2 52:54:00:12:35:00
10.0.2.3 08:00:27:78:66:95
10.0.2.11 08:00:27:65:96:cd
10.0.2.12 08:00:27:2f:64:fe
root@denizhalil:/PacketSpy# python3 packetspy.py -t 10.0.2.11 -g 10.0.2.1 -i eth0
******************* started sniff *******************
HTTP Request:
Method: b'POST'
Host: b'testphp.vulnweb.com'
Path: b'/userinfo.php'
Source IP: 10.0.2.20
Source MAC: 08:00:27:04:e8:82
Protocol: HTTP
User-Agent: b'Mozilla/5.0 (X11; Linux x86_64; rv:105.0) Gecko/20100101 Firefox/105.0'
Raw Payload:
b'uname=admin&pass=mysecretpassword'
HTTP Response:
Status Code: b'302'
Content Type: b'text/html; charset=UTF-8'
--------------------------------------------------
Https work still in progress
Contributions are welcome! To contribute to PacketSpy, follow these steps:
If you have any questions, comments, or suggestions about PacketSpy, please feel free to contact me:
PacketSpy is released under the MIT License. See LICENSE for more information.
NetProbe is a tool you can use to scan for devices on your network. The program sends ARP requests to any IP address on your network and lists the IP addresses, MAC addresses, manufacturers, and device models of the responding devices.
You can download the program from the GitHub page.
$ git clone https://github.com/HalilDeniz/NetProbe.gitTo install the required libraries, run the following command:
$ pip install -r requirements.txtTo run the program, use the following command:
$ python3 netprobe.py [-h] -t [...] -i [...] [-l] [-o] [-m] [-r] [-s]-h,--help: show this help message and exit-t,--target: Target IP address or subnet (default: 192.168.1.0/24)-i,--interface: Interface to use (default: None)-l,--live: Enable live tracking of devices-o,--output: Output file to save the results-m,--manufacturer: Filter by manufacturer (e.g., 'Apple')-r,--ip-range: Filter by IP range (e.g., '192.168.1.0/24')-s,--scan-rate: Scan rate in seconds (default: 5)$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -o results.txt -l$ python3 netprobe.py --help
usage: netprobe.py [-h] -t [...] -i [...] [-l] [-o] [-m] [-r] [-s]
NetProbe: Network Scanner Tool
options:
-h, --help show this help message and exit
-t [ ...], --target [ ...]
Target IP address or subnet (default: 192.168.1.0/24)
-i [ ...], --interface [ ...]
Interface to use (default: None)
-l, --live Enable live tracking of devices
-o , --output Output file to save the results
-m , --manufacturer Filter by manufacturer (e.g., 'Apple')
-r , --ip-range Filter by IP range (e.g., '192.168.1.0/24')
-s , --scan-rate Scan rate in seconds (default: 5)
$ python3 netprobe.py You can enable live tracking of devices on your network by using the -l or --live flag. This will continuously update the device list every 5 seconds.
$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -lYou can save the scan results to a file by using the -o or --output flag followed by the desired output file name.
$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -l -o results.txt
ββββββββββββββββ³ββββββββββββββββββββ³ββββββββββββββ³βββββββββββββββββββββββββββββββ
β IP Address β MAC Address β Packet Size β Manufacturer β
β‘ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ©
β 192.168.1.1 β **:6e:**:97:**:28 β 102 β ASUSTek COMPUTER INC. β
β 192.168.1.3 β 00:**:22:**:12:** β 102 β InPro Comm β
β 192.168.1.2 β **:32:**:bf:**:00 β 102 β Xiaomi Communications Co Ltd β
β 192.168.1.98 β d4:**:64:**:5c:** β 102 β ASUSTek COMPUTER INC. β
β 192.168.1.25 β **:49:**:00:**:38 β 102 β Unknown β
ββββββββββββββββ΄ββββββββββββββββββββ΄ββββββββββββββ΄βββββββββββββββββββββββββββββββ
If you have any questions, suggestions, or feedback about the program, please feel free to reach out to me through any of the following platforms:
This program is released under the MIT LICENSE. See LICENSE for more information.
DoSinator is a versatile Denial of Service (DoS) testing tool developed in Python. It empowers security professionals and researchers to simulate various types of DoS attacks, allowing them to assess the resilience of networks, systems, and applications against potential cyber threats.Β
Clone the repository:
git clone https://github.com/HalilDeniz/DoSinator.gitNavigate to the project directory:
cd DoSinatorInstall the required dependencies:
pip install -r requirements.txtusage: dos_tool.py [-h] -t TARGET -p PORT [-np NUM_PACKETS] [-ps PACKET_SIZE]
[-ar ATTACK_RATE] [-d DURATION] [-am {syn,udp,icmp,http,dns}]
[-sp SPOOF_IP] [--data DATA]
optional arguments:
-h, --help Show this help message and exit.
-t TARGET, --target TARGET
Target IP address.
-p PORT, --port PORT Target port number.
-np NUM_PACKETS, --num_packets NUM_PACKETS
Number of packets to send (default: 500).
-ps PACKET_SIZE, --packet_size PACKET_SIZE
Packet size in bytes (default: 64).
-ar ATTACK_RATE, --attack_rate ATTACK_RATE
Attack rate in packets per second (default: 10).
-d DURATION, --duration DURATION
Duration of the attack in seconds.
-am {syn,udp,icmp,htt p,dns}, --attack-mode {syn,udp,icmp,http,dns}
Attack mode (default: syn).
-sp SPOOF_IP, --spoof-ip SPOOF_IP
Spoof IP address.
--data DATA Custom data string to send.target_ip: IP address of the target system.target_port: Port number of the target service.num_packets: Number of packets to send (default: 500).packet_size: Size of each packet in bytes (default: 64).attack_rate: Attack rate in packets/second (default: 10).duration: Duration of the attack in seconds.attack_mode: Attack mode: syn, udp, icmp, http (default: syn).spoof_ip: Spoof IP address (default: None).data: Custom data string to send.The usage of the Dosinator tool for attacking targets without prior mutual consent is illegal. It is the end user's responsibility to obey all applicable local, state, and federal laws. The author assumes no liability and is not responsible for any misuse or damage caused by this program.
By using Dosinator, you agree to use this tool for educational and ethical purposes only. The author is not responsible for any actions or consequences resulting from misuse of this tool.
Please ensure that you have the necessary permissions to conduct any form of testing on a target network. Use this tool at your own risk.
Contributions are welcome! If you find any issues or have suggestions for improvements, feel free to open an issue or submit a pull request.
If you have any questions, comments, or suggestions about Dosinator, please feel free to contact me:
