NetProbe is a tool you can use to scan for devices on your network. The program sends ARP requests to any IP address on your network and lists the IP addresses, MAC addresses, manufacturers, and device models of the responding devices.
You can download the program from the GitHub page.
$ git clone https://github.com/HalilDeniz/NetProbe.git
To install the required libraries, run the following command:
$ pip install -r requirements.txt
To run the program, use the following command:
$ python3 netprobe.py [-h] -t [...] -i [...] [-l] [-o] [-m] [-r] [-s]
-h
,--help
: show this help message and exit-t
,--target
: Target IP address or subnet (default: 192.168.1.0/24)-i
,--interface
: Interface to use (default: None)-l
,--live
: Enable live tracking of devices-o
,--output
: Output file to save the results-m
,--manufacturer
: Filter by manufacturer (e.g., 'Apple')-r
,--ip-range
: Filter by IP range (e.g., '192.168.1.0/24')-s
,--scan-rate
: Scan rate in seconds (default: 5)$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -o results.txt -l
$ python3 netprobe.py --help
usage: netprobe.py [-h] -t [...] -i [...] [-l] [-o] [-m] [-r] [-s]
NetProbe: Network Scanner Tool
options:
-h, --help show this help message and exit
-t [ ...], --target [ ...]
Target IP address or subnet (default: 192.168.1.0/24)
-i [ ...], --interface [ ...]
Interface to use (default: None)
-l, --live Enable live tracking of devices
-o , --output Output file to save the results
-m , --manufacturer Filter by manufacturer (e.g., 'Apple')
-r , --ip-range Filter by IP range (e.g., '192.168.1.0/24')
-s , --scan-rate Scan rate in seconds (default: 5)
$ python3 netprobe.py
You can enable live tracking of devices on your network by using the -l
or --live
flag. This will continuously update the device list every 5 seconds.
$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -l
You can save the scan results to a file by using the -o
or --output
flag followed by the desired output file name.
$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -l -o results.txt
ββββββββββββββββ³ββββββββββββββββββββ³ββββββββββββββ³βββββββββββββββββββββββββββββββ
β IP Address β MAC Address β Packet Size β Manufacturer β
β‘ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ©
β 192.168.1.1 β **:6e:**:97:**:28 β 102 β ASUSTek COMPUTER INC. β
β 192.168.1.3 β 00:**:22:**:12:** β 102 β InPro Comm β
β 192.168.1.2 β **:32:**:bf:**:00 β 102 β Xiaomi Communications Co Ltd β
β 192.168.1.98 β d4:**:64:**:5c:** β 102 β ASUSTek COMPUTER INC. β
β 192.168.1.25 β **:49:**:00:**:38 β 102 β Unknown β
ββββββββββββββββ΄ββββββββββββββββββββ΄ββββββββββββββ΄βββββββββββββββββββββββββββββββ
If you have any questions, suggestions, or feedback about the program, please feel free to reach out to me through any of the following platforms:
This program is released under the MIT LICENSE. See LICENSE for more information.
PassBreaker is a command-line password cracking tool developed in Python. It allows you to perform various password cracking techniques such as wordlist-based attacks and brute force attacks.Β
Clone the repository:
git clone https://github.com/HalilDeniz/PassBreaker.git
Install the required dependencies:
pip install -r requirements.txt
python passbreaker.py <password_hash> <wordlist_file> [--algorithm]
Replace <password_hash>
with the target password hash and <wordlist_file>
with the path to the wordlist file containing potential passwords.
--algorithm <algorithm>
: Specify the hash algorithm to use (e.g., md5, sha256, sha512).-s, --salt <salt>
: Specify a salt value to use.-p, --parallel
: Enable parallel processing for faster cracking.-c, --complexity
: Evaluate password complexity before cracking.-b, --brute-force
: Perform a brute force attack.--min-length <min_length>
: Set the minimum password length for brute force attacks.--max-length <max_length>
: Set the maximum password length for brute force attacks.--character-set <character_set>
: Set the character set to use for brute force attacks.Elbette! Δ°Εte Δ°ngilizce olarak yazΔ±lmΔ±Ε baΕlΔ±k ve küçük bir bilgi ile daha fazla kullanΔ±m ΓΆrneΔi:
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm md5
This command attempts to crack the password with the hash value "5f4dcc3b5aa765d61d8327deb882cf99" using the MD5 algorithm and a wordlist from the "passwords.txt" file.
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 --brute-force --min-length 6 --max-length 8 --character-set abc123
This command performs a brute force attack to crack the password with the hash value "5f4dcc3b5aa765d61d8327deb882cf99" by trying all possible combinations of passwords with a length between 6 and 8 characters, using the character set "abc123".
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm sha256 --complexity
This command evaluates the complexity of passwords in the "passwords.txt" file and attempts to crack the password with the hash value "5f4dcc3b5aa765d61d8327deb882cf99" using the SHA-256 algorithm. It only tries passwords that meet the complexity requirements.
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm md5 --salt mysalt123
This command uses a specific salt value ("mysalt123") for the password cracking process. Salt is used to enhance the security of passwords.
python passbreaker.py 5f4dcc3b5aa765d61d8327deb882cf99 passwords.txt --algorithm sha512 --parallel
This command performs password cracking with parallel processing for faster cracking. It utilizes multiple processing cores, but it may consume more system resources.
These examples demonstrate different features and use cases of the "PassBreaker" password cracking tool. Users can customize the parameters based on their needs and goals.
This tool is intended for educational and ethical purposes only. Misuse of this tool for any malicious activities is strictly prohibited. The developers assume no liability and are not responsible for any misuse or damage caused by this tool.
Contributions are welcome! To contribute to PassBreaker, follow these steps:
If you have any questions, comments, or suggestions about PassBreaker, please feel free to contact me:
PassBreaker is released under the MIT License. See LICENSE for more information.
TrafficWatch, a packet sniffer tool, allows you to monitor and analyze network traffic from PCAP files. It provides insights into various network protocols and can help with network troubleshooting, security analysis, and more.
Clone the repository:
git clone https://github.com/HalilDeniz/TrafficWatch.git
Navigate to the project directory:
cd TrafficWatch
Install the required dependencies:
pip install -r requirements.txt
python3 trafficwatch.py --help
usage: trafficwatch.py [-h] -f FILE [-p {ARP,ICMP,TCP,UDP,DNS,DHCP,HTTP,SNMP,LLMNR,NetBIOS}] [-c COUNT]
Packet Sniffer Tool
options:
-h, --help show this help message and exit
-f FILE, --file FILE Path to the .pcap file to analyze
-p {ARP,ICMP,TCP,UDP,DNS,DHCP,HTTP,SNMP,LLMNR,NetBIOS}, --protocol {ARP,ICMP,TCP,UDP,DNS,DHCP,HTTP,SNMP,LLMNR,NetBIOS}
Filter by specific protocol
-c COUNT, --count COUNT
Number of packets to display
To analyze packets from a PCAP file, use the following command:
python trafficwatch.py -f path/to/your.pcap
To specify a protocol filter (e.g., HTTP) and limit the number of displayed packets (e.g., 10), use:
python trafficwatch.py -f path/to/your.pcap -p HTTP -c 10
-f
or --file
: Path to the PCAP file for analysis.-p
or --protocol
: Filter packets by protocol (ARP, ICMP, TCP, UDP, DNS, DHCP, HTTP, SNMP, LLMNR, NetBIOS).-c
or --count
: Limit the number of displayed packets.Contributions are welcome! If you want to contribute to TrafficWatch, please follow our contribution guidelines.
If you have any questions, comments, or suggestions about Dosinator, please feel free to contact me:
This project is licensed under the MIT License.
Thank you for considering supporting me! Your support enables me to dedicate more time and effort to creating useful tools like DNSWatch and developing new projects. By contributing, you're not only helping me improve existing tools but also inspiring new ideas and innovations. Your support plays a vital role in the growth of this project and future endeavors. Together, let's continue building and learning. Thank you!"Β
kalipm.sh is a powerful package management tool for Kali Linux that provides a user-friendly menu-based interface to simplify the installation of various packages and tools. It streamlines the process of managing software and enables users to effortlessly install packages from different categories.Β
apt-get
package manager.To install KaliPm, you can simply clone the repository from GitHub:
git clone https://github.com/HalilDeniz/KaliPackergeManager.git
chmod +x kalipm.sh
./kalipm.sh
KaliPM.sh also includes an update feature to ensure your system is up to date. Simply select the "Update" option from the menu, and the script will run the necessary commands to clean, update, upgrade, and perform a full-upgrade on your system.
Contributions are welcome! To contribute to KaliPackergeManager, follow these steps:
If you have any questions, comments, or suggestions about Tool Name, please feel free to contact me:
Associated-Threat-Analyzer detects malicious IPv4 addresses and domain names associated with your web application using local malicious domain and IPv4 lists.
git clone https://github.com/OsmanKandemir/associated-threat-analyzer.git
cd associated-threat-analyzer && pip3 install -r requirements.txt
python3 analyzer.py -d target-web.com
You can run this application on a container after build a Dockerfile.
docker build -t osmankandemir/threatanalyzer .
docker run osmankandemir/threatanalyzer -d target-web.com
docker pull osmankandemir/threatanalyzer
docker run osmankandemir/threatanalyzer -d target-web.com
-d DOMAIN , --domain DOMAIN Input Target. --domain target-web1.com
-t DOMAINSFILE, --DomainsFile Malicious Domains List to Compare. -t SampleMaliciousDomains.txt
-i IPSFILE, --IPsFile Malicious IPs List to Compare. -i SampleMaliciousIPs.txt
-o JSON, --json JSON JSON output. --json
https://github.com/OsmanKandemir/indicator-intelligence
https://github.com/stamparm/blackbook
https://github.com/stamparm/ipsum
xsubfind3r
is a command-line interface (CLI) utility to find domain's known subdomains from curated passive online sources.
Fetches domains from curated passive sources to maximize results.
Supports stdin
and stdout
for easy integration into workflows.
Cross-Platform (Windows, Linux & macOS).
Visit the releases page and find the appropriate archive for your operating system and architecture. Download the archive from your browser or copy its URL and retrieve it with wget
or curl
:
...with wget
:
wget https://github.com/hueristiq/xsubfind3r/releases/download/v<version>/xsubfind3r-<version>-linux-amd64.tar.gz
...or, with curl
:
curl -OL https://github.com/hueristiq/xsubfind3r/releases/download/v<version>/xsubfind3r-<version>-linux-amd64.tar.gz
...then, extract the binary:
tar xf xsubfind3r-<version>-linux-amd64.tar.gz
TIP: The above steps, download and extract, can be combined into a single step with this onliner
curl -sL https://github.com/hueristiq/xsubfind3r/releases/download/v<version>/xsubfind3r-<version>-linux-amd64.tar.gz | tar -xzv
NOTE: On Windows systems, you should be able to double-click the zip archive to extract the xsubfind3r
executable.
...move the xsubfind3r
binary to somewhere in your PATH
. For example, on GNU/Linux and OS X systems:
sudo mv xsubfind3r /usr/local/bin/
NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xsubfind3r
to their PATH
.
Before you install from source, you need to make sure that Go is installed on your system. You can install Go by following the official instructions for your operating system. For this, we will assume that Go is already installed.
go install ...
go install -v github.com/hueristiq/xsubfind3r/cmd/xsubfind3r@latest
go build ...
the development VersionClone the repository
git clone https://github.com/hueristiq/xsubfind3r.git
Build the utility
cd xsubfind3r/cmd/xsubfind3r && \
go build .
Move the xsubfind3r
binary to somewhere in your PATH
. For example, on GNU/Linux and OS X systems:
sudo mv xsubfind3r /usr/local/bin/
NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xsubfind3r
to their PATH
.
NOTE: While the development version is a good way to take a peek at xsubfind3r
's latest features before they get released, be aware that it may have bugs. Officially released versions will generally be more stable.
xsubfind3r
will work right after installation. However, BeVigil, Chaos, Fullhunt, Github, Intelligence X and Shodan require API keys to work, URLScan supports API key but not required. The API keys are stored in the $HOME/.hueristiq/xsubfind3r/config.yaml
file - created upon first run - and uses the YAML format. Multiple API keys can be specified for each of these source from which one of them will be used.
Example config.yaml
:
version: 0.3.0
sources:
- alienvault
- anubis
- bevigil
- chaos
- commoncrawl
- crtsh
- fullhunt
- github
- hackertarget
- intelx
- shodan
- urlscan
- wayback
keys:
bevigil:
- awA5nvpKU3N8ygkZ
chaos:
- d23a554bbc1aabb208c9acfbd2dd41ce7fc9db39asdsd54bbc1aabb208c9acfb
fullhunt:
- 0d9652ce-516c-4315-b589-9b241ee6dc24
github:
- d23a554bbc1aabb208c9acfbd2dd41ce7fc9db39
- asdsd54bbc1aabb208c9acfbd2dd41ce7fc9db39
intelx:
- 2.intelx.io:00000000-0000-0000-0000-000000000000
shodan:
- AAAAClP1bJJSRMEYJazgwhJKrggRwKA
urlscan:
- d4c85d34-e425-446e-d4ab-f5a3412acbe8
To display help message for xsubfind3r
use the -h
flag:
xsubfind3r -h
help message:
_ __ _ _ _____
__ _____ _ _| |__ / _(_)_ __ __| |___ / _ __
\ \/ / __| | | | '_ \| |_| | '_ \ / _` | |_ \| '__|
> <\__ \ |_| | |_) | _| | | | | (_| |___) | |
/_/\_\___/\__,_|_.__/|_| |_|_| |_|\__,_|____/|_| v0.3.0
USAGE:
xsubfind3r [OPTIONS]
INPUT:
-d, --domain string[] target domains
-l, --list string target domains' list file path
SOURCES:
--sources bool list supported sources
-u, --sources-to-use string[] comma(,) separeted sources to use
-e, --sources-to-exclude string[] comma(,) separeted sources to exclude
OPTIMIZATION:
-t, --threads int number of threads (default: 50)
OUTPUT:
--no-color bool disable colored output
-o, --output string output subdomains' file path
-O, --output-directory string output subdomains' directory path
-v, --verbosity string debug, info, warning, error, fatal or silent (default: info)
CONFIGURATION:
-c, --configuration string configuration file path (default: ~/.hueristiq/xsubfind3r/config.yaml)
Issues and Pull Requests are welcome! Check out the contribution guidelines.
This utility is distributed under the MIT license.
xcrawl3r
is a command-line interface (CLI) utility to recursively crawl webpages i.e systematically browse webpages' URLs and follow links to discover linked webpages' URLs.
.js
, .json
, .xml
, .csv
, .txt
& .map
).robots.txt
.Visit the releases page and find the appropriate archive for your operating system and architecture. Download the archive from your browser or copy its URL and retrieve it with wget
or curl
:
...with wget
:
wget https://github.com/hueristiq/xcrawl3r/releases/download/v<version>/xcrawl3r-<version>-linux-amd64.tar.gz
...or, with curl
:
curl -OL https://github.com/hueristiq/xcrawl3r/releases/download/v<version>/xcrawl3r-<version>-linux-amd64.tar.gz
...then, extract the binary:
tar xf xcrawl3r-<version>-linux-amd64.tar.gz
TIP: The above steps, download and extract, can be combined into a single step with this onliner
curl -sL https://github.com/hueristiq/xcrawl3r/releases/download/v<version>/xcrawl3r-<version>-linux-amd64.tar.gz | tar -xzv
NOTE: On Windows systems, you should be able to double-click the zip archive to extract the xcrawl3r
executable.
...move the xcrawl3r
binary to somewhere in your PATH
. For example, on GNU/Linux and OS X systems:
sudo mv xcrawl3r /usr/local/bin/
NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xcrawl3r
to their PATH
.
Before you install from source, you need to make sure that Go is installed on your system. You can install Go by following the official instructions for your operating system. For this, we will assume that Go is already installed.
go install ...
go install -v github.com/hueristiq/xcrawl3r/cmd/xcrawl3r@latest
go build ...
the development VersionClone the repository
git clone https://github.com/hueristiq/xcrawl3r.git
Build the utility
cd xcrawl3r/cmd/xcrawl3r && \
go build .
Move the xcrawl3r
binary to somewhere in your PATH
. For example, on GNU/Linux and OS X systems:
sudo mv xcrawl3r /usr/local/bin/
NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xcrawl3r
to their PATH
.
NOTE: While the development version is a good way to take a peek at xcrawl3r
's latest features before they get released, be aware that it may have bugs. Officially released versions will generally be more stable.
To display help message for xcrawl3r
use the -h
flag:
xcrawl3r -h
help message:
_ _____
__ _____ _ __ __ ___ _| |___ / _ __
\ \/ / __| '__/ _` \ \ /\ / / | |_ \| '__|
> < (__| | | (_| |\ V V /| |___) | |
/_/\_\___|_| \__,_| \_/\_/ |_|____/|_| v0.1.0
A CLI utility to recursively crawl webpages.
USAGE:
xcrawl3r [OPTIONS]
INPUT:
-d, --domain string domain to match URLs
--include-subdomains bool match subdomains' URLs
-s, --seeds string seed URLs file (use `-` to get from stdin)
-u, --url string URL to crawl
CONFIGURATION:
--depth int maximum depth to crawl (default 3)
TIP: set it to `0` for infinite recursion
--headless bool If true the browser will be displayed while crawling.
-H, --headers string[] custom header to include in requests
e.g. -H 'Referer: http://example.com/'
TIP: use multiple flag to set multiple headers
--proxy string[] Proxy URL (e.g: http://127.0.0.1:8080)
TIP: use multiple flag to set multiple proxies
--render bool utilize a headless chrome instance to render pages
--timeout int time to wait for request in seconds (default: 10)
--user-agent string User Agent to use (default: web)
TIP: use `web` for a random web user-agent,
`mobile` for a random mobile user-agent,
or you can set your specific user-agent.
RATE LIMIT:
-c, --concurrency int number of concurrent fetchers to use (default 10)
--delay int delay between each request in seconds
--max-random-delay int maximux extra randomized delay added to `--dalay` (default: 1s)
-p, --parallelism int number of concurrent URLs to process (default: 10)
OUTPUT:
--debug bool enable debug mode (default: false)
-m, --monochrome bool coloring: no colored output mode
-o, --output string output file to write found URLs
-v, --verbosity string debug, info, warning, error, fatal or silent (default: debug)
Issues and Pull Requests are welcome! Check out the contribution guidelines.
This utility is distributed under the MIT license.
Alternatives - Check out projects below, that may fit in your workflow:
xurlfind3r
is a command-line interface (CLI) utility to find domain's known URLs from curated passive online sources.
robots.txt
snapshots.Visit the releases page and find the appropriate archive for your operating system and architecture. Download the archive from your browser or copy its URL and retrieve it with wget
or curl
:
...with wget
:
wget https://github.com/hueristiq/xurlfind3r/releases/download/v<version>/xurlfind3r-<version>-linux-amd64.tar.gz
...or, with curl
:
curl -OL https://github.com/hueristiq/xurlfind3r/releases/download/v<version>/xurlfind3r-<version>-linux-amd64.tar.gz
...then, extract the binary:
tar xf xurlfind3r-<version>-linux-amd64.tar.gz
TIP: The above steps, download and extract, can be combined into a single step with this onliner
curl -sL https://github.com/hueristiq/xurlfind3r/releases/download/v<version>/xurlfind3r-<version>-linux-amd64.tar.gz | tar -xzv
NOTE: On Windows systems, you should be able to double-click the zip archive to extract the xurlfind3r
executable.
...move the xurlfind3r
binary to somewhere in your PATH
. For example, on GNU/Linux and OS X systems:
sudo mv xurlfind3r /usr/local/bin/
NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xurlfind3r
to their PATH
.
Before you install from source, you need to make sure that Go is installed on your system. You can install Go by following the official instructions for your operating system. For this, we will assume that Go is already installed.
go install ...
go install -v github.com/hueristiq/xurlfind3r/cmd/xurlfind3r@latest
go build ...
the development VersionClone the repository
git clone https://github.com/hueristiq/xurlfind3r.git
Build the utility
cd xurlfind3r/cmd/xurlfind3r && \
go build .
Move the xurlfind3r
binary to somewhere in your PATH
. For example, on GNU/Linux and OS X systems:
sudo mv xurlfind3r /usr/local/bin/
NOTE: Windows users can follow How to: Add Tool Locations to the PATH Environment Variable in order to add xurlfind3r
to their PATH
.
NOTE: While the development version is a good way to take a peek at xurlfind3r
's latest features before they get released, be aware that it may have bugs. Officially released versions will generally be more stable.
xurlfind3r
will work right after installation. However, BeVigil, Github and Intelligence X require API keys to work, URLScan supports API key but not required. The API keys are stored in the $HOME/.hueristiq/xurlfind3r/config.yaml
file - created upon first run - and uses the YAML format. Multiple API keys can be specified for each of these source from which one of them will be used.
Example config.yaml
:
version: 0.2.0
sources:
- bevigil
- commoncrawl
- github
- intelx
- otx
- urlscan
- wayback
keys:
bevigil:
- awA5nvpKU3N8ygkZ
github:
- d23a554bbc1aabb208c9acfbd2dd41ce7fc9db39
- asdsd54bbc1aabb208c9acfbd2dd41ce7fc9db39
intelx:
- 2.intelx.io:00000000-0000-0000-0000-000000000000
urlscan:
- d4c85d34-e425-446e-d4ab-f5a3412acbe8
To display help message for xurlfind3r
use the -h
flag:
xurlfind3r -h
help message:
_ __ _ _ _____
__ ___ _ _ __| |/ _(_)_ __ __| |___ / _ __
\ \/ / | | | '__| | |_| | '_ \ / _` | |_ \| '__|
> <| |_| | | | | _| | | | | (_| |___) | |
/_/\_\\__,_|_| |_|_| |_|_| |_|\__,_|____/|_| v0.2.0
USAGE:
xurlfind3r [OPTIONS]
TARGET:
-d, --domain string (sub)domain to match URLs
SCOPE:
--include-subdomains bool match subdomain's URLs
SOURCES:
-s, --sources bool list sources
-u, --use-sources string sources to use (default: bevigil,commoncrawl,github,intelx,otx,urlscan,wayback)
--skip-wayback-robots bool with wayback, skip parsing robots.txt snapshots
--skip-wayback-source bool with wayback , skip parsing source code snapshots
FILTER & MATCH:
-f, --filter string regex to filter URLs
-m, --match string regex to match URLs
OUTPUT:
--no-color bool no color mode
-o, --output string output URLs file path
-v, --verbosity string debug, info, warning, error, fatal or silent (default: info)
CONFIGURATION:
-c, --configuration string configuration file path (default: ~/.hueristiq/xurlfind3r/config.yaml)
xurlfind3r -d hackerone.com --include-subdomains
# filter images
xurlfind3r -d hackerone.com --include-subdomains -f '`^https?://[^/]*?/.*\.(jpg|jpeg|png|gif|bmp)(\?[^\s]*)?$`'
# match js URLs
xurlfind3r -d hackerone.com --include-subdomains -m '^https?://[^/]*?/.*\.js(\?[^\s]*)?$'
Issues and Pull Requests are welcome! Check out the contribution guidelines.
This utility is distributed under the MIT license.
Penetration tests on SSH servers using dictionary attacks. Written in C.
brute krag means "brute force" in afrikΓ‘ans
This tool is for ethical testing purpose only.
cbrutekrag and its owners can't be held responsible for misuse by users.
Users have to act as permitted by local law rules.
Β
cbrutekrag uses libssh - The SSH Library (http://www.libssh.org/)
Requirements:
make
gcc
compilerlibssh-dev
git clone --depth=1 https://github.com/matricali/cbrutekrag.git
cd cbrutekrag
make
make install
Requirements:
cmake
gcc
compilermake
libssl-dev
libz-dev
git clone --depth=1 https://github.com/matricali/cbrutekrag.git
cd cbrutekrag
bash static-build.sh
make install
$ cbrutekrag -h
_ _ _
| | | | | |
___ | |__ _ __ _ _| |_ ___| | ___ __ __ _ __ _
/ __|| '_ \| '__| | | | __/ _ \ |/ / '__/ _` |/ _` |
| (__ | |_) | | | |_| | || __/ <| | | (_| | (_| |
\___||_.__/|_| \__,_|\__\___|_|\_\_| \__,_|\__, |
OpenSSH Brute force tool 0.5.0 __/ |
(c) Copyright 2014-2022 Jorge Matricali |___/
usage: ./cbrutekrag [-h] [-v] [-aA] [-D] [-P] [-T TARGETS.lst] [-C combinations.lst]
[-t THREADS] [-o OUTPUT.txt] [TARGETS...]
-h This help
-v Verbose mode
-V Verbose mode (sshlib)
-s Scan mode
-D Dry run
-P Progress bar
-T <targets> Targets file
-C <combinations> Username and password file -t <threads> Max threads
-o <output> Output log file
-a Accepts non OpenSSH servers
-A Allow servers detected as honeypots.
cbrutekrag -T targets.txt -C combinations.txt -o result.log
cbrutekrag -s -t 8 -C combinations.txt -o result.log 192.168.1.0/24
root root
root password
root $BLANKPASS$
This is a command-line tool written in Python that applies one or more transmutation rules to a given password or a list of passwords read from one or more files. The tool can be used to generate transformed passwords for security testing or research purposes. Also, while you doing pentesting it will be very useful tool for you to brute force the passwords!!
How Passmute can also help to secure our passwords more?
PassMute can help to generate strong and complex passwords by applying different transformation rules to the input password. However, password security also depends on other factors such as the length of the password, randomness, and avoiding common phrases or patterns.
The transformation rules include:
reverse: reverses the password string
uppercase: converts the password to uppercase letters
lowercase: converts the password to lowercase letters
swapcase: swaps the case of each letter in the password
capitalize: capitalizes the first letter of the password
leet: replaces some letters in the password with their leet equivalents
strip: removes all whitespace characters from the password
The tool can also write the transformed passwords to an output file and run the transformation process in parallel using multiple threads.
Installation
git clone https://HITH-Hackerinthehouse/PassMute.git
cd PassMute
chmod +x PassMute.py
Usage To use the tool, you need to have Python 3 installed on your system. Then, you can run the tool from the command line using the following options:
python PassMute.py [-h] [-f FILE [FILE ...]] -r RULES [RULES ...] [-v] [-p PASSWORD] [-o OUTPUT] [-t THREAD_TIMEOUT] [--max-threads MAX_THREADS]
Here's a brief explanation of the available options:
-h or --help: shows the help message and exits
-f (FILE) [FILE ...], --file (FILE) [FILE ...]: one or more files to read passwords from
-r (RULES) [RULES ...] or --rules (RULES) [RULES ...]: one or more transformation rules to apply
-v or --verbose: prints verbose output for each password transformation
-p (PASSWORD) or --password (PASSWORD): transforms a single password
-o (OUTPUT) or --output (OUTPUT): output file to save the transformed passwords
-t (THREAD_TIMEOUT) or --thread-timeout (THREAD_TIMEOUT): timeout for threads to complete (in seconds)
--max-threads (MAX_THREADS): maximum number of threads to run simultaneously (default: 10)
NOTE: If you are getting any error regarding argparse module then simply install the module by following command: pip install argparse
Examples
Here are some example commands those read passwords from a file, applies two transformation rules, and saves the transformed passwords to an output file:
Single Password transmutation: python PassMute.py -p HITHHack3r -r leet reverse swapcase -v -t 50
Multiple Password transmutation: python PassMute.py -f testwordlists.txt -r leet reverse -v -t 100 -o testupdatelists.txt
Here Verbose and Thread are recommended to use in case you're transmutating big files and also it depends upon your microprocessor as well, it's not required every time to use threads and verbose mode.
Legal Disclaimer:
You might be super excited to use this tool, we too. But here we need to confirm! Hackerinthehouse, any contributor of this project and Github won't be responsible for any actions made by you. This tool is made for security research and educational purposes only. It is the end user's responsibility to obey all applicable local, state and federal laws.