FreshRSS

🔒
❌ Secure Planet Training Courses Updated For 2019 - Click Here
☷
△ 🔃
There are new available articles, click to refresh the page.
Before yesterdayKitPloit - PenTest Tools!

CloudGrappler - A purpose-built tool designed for effortless querying of high-fidelity and single-event detections related to well-known threat actors in popular cloud environments such as AWS and Azure

By: Zion3R


Permiso: https://permiso.io
Read our release blog: https://permiso.io/blog/cloudgrappler-a-powerful-open-source-threat-detection-tool-for-cloud-environments

CloudGrappler is a purpose-built tool designed for effortless querying of high-fidelity and single-event detections related to well-known threat actors in popular cloud environments such as AWS and Azure.


Notes

To optimize your utilization of CloudGrappler, we recommend using shorter time ranges when querying for results. This approach enhances efficiency and accelerates the retrieval of information, ensuring a more seamless experience with the tool.

Required Packages

bash pip3 install -r requirements.txt

Cloning cloudgrep locally

To clone the cloudgrep repository locally, run the clone.sh file. Alternatively, you can manually clone the repository into the same directory where CloudGrappler was cloned.

bash chmod +x clone.sh ./clone.sh

Input

This tool offers a CLI (Command Line Interface). As such, here we review its use:

Example 1 - Running the tool with default queries file

Define the scanning scope inside data_sources.json file based on your cloud infrastructure configuration. The following example showcases a structured data_sources.json file for both AWS and Azure environments:

Note

Modifying the source inside the queries.json file to a wildcard character (*) will scan the corresponding query across both AWS and Azure environments.

{
  "AWS": [
    {
      "bucket": "cloudtrail-logs-00000000-ffffff",
      "prefix": [
        "testTrails/AWSLogs/00000000/CloudTrail/eu-east-1/2024/03/03",
        "testTrails/AWSLogs/00000000/CloudTrail/us-west-1/2024/03/04"
      ]
    },
    {
      "bucket": "aws-kosova-us-east-1-00000000"
    }

  ],
  "AZURE": [
    {
      "accountname": "logs",
      "container": [
        "cloudgrappler"
      ]
    }
  ]
}

Run command

python3 main.py

Example 2 - Permiso Intel Use Case

python3 main.py -p

[+] Running GetFileDownloadUrls.*secrets_ for AWS 
[+] Threat Actor: LUCR3 
[+] Severity: MEDIUM 
[+] Description: Review use of CloudShell. Permiso seldom witnesses use of CloudShell outside of known attackers.This however may be a part of your normal business use case.

Example 3 - Generate report

python3 main.py -p -jo

reports
└── json
    ├── AWS
    │   └── 2024-03-04 01:01 AM
    │       └── cloudtrail-logs-00000000-ffffff--
    │           └── testTrails/AWSLogs/00000000/CloudTrail/eu-east-1/2024/03/03
    │               └── GetFileDownloadUrls.*secrets_.json
    └── AZURE
        └── 2024-03-04 01:01 AM
            └── logs
                └── cloudgrappler
                    └── okta_key.json

Example 4 - Filtering logs based on date or time

python3 main.py -p -sd 2024-02-15 -ed 2024-02-16

Example 5 - Manually adding queries and data source types

python3 main.py -q "GetFileDownloadUrls.*secret", "UpdateAccessKey" -s '*'

Example 6 - Running the tool with your own queries file

python3 main.py -f new_file.json

Running in your Cloud and Authentication cloudgrep

AWS

Your system will need access to the S3 bucket. For example, if you are running on your laptop, you will need to configure the AWS CLI. If you are running on an EC2, an Instance Profile is likely the best choice.

If you run on an EC2 instance in the same region as the S3 bucket with a VPC endpoint for S3 you can avoid egress charges. You can authenticate in a number of ways.

Azure

The simplest way to authenticate with Azure is to first run:

az login

This will open a browser window and prompt you to login to Azure.



WiFi-Pineapple-MK7_REST-Client - WiFi Hacking Workflow With WiFi Pineapple Mark VII API

By: Zion3R


PINEAPPLE MARK VII REST CLIENT

Author:: TW-D

Version:: 1.3.7

Copyright:: Copyright (c) 2022 TW-D

License:: Distributes under the same terms as Ruby

Doc:: https://hak5.github.io/mk7-docs/docs/rest/rest/

Requires:: Ruby >= 2.7.0p0 and Pineapple Mark VII >= 2.1.0-stable

Installation (Debian, Ubuntu, Raspbian)::

  • sudo apt-get install build-essential curl g++ ruby ruby-dev

  • sudo gem install net-ssh rest-client tty-progressbar

Description

Library allowing the automation of active or passive attack operations.

Note : "Issues" and "Pull Request" are welcome.


Payloads

In "./payloads/" directory, you will find :

COMMAND and CONTROL Author Usage
Hak5 Key Croc - Real-time recovery of keystrokes from a keyboard TW-D (edit) ruby ./hak5_key-croc.rb
Maltronics WiFi Deauther - Spam beacon frames TW-D (edit) ruby ./maltronics_wifi-deauther.rb
DEFENSE Author Usage
Hak5 Pineapple Spotter TW-D with special thanks to @DrSKiZZ, @cribb-it, @barry99705 and @dark_pyrro (edit) ruby ./hak5-pineapple_spotter.rb
DoS Author Usage
Deauthentication of clients available on the access points TW-D (edit) ruby ./deauthentication-clients.rb
EXPLOITATION Author Usage
Evil WPA Access Point TW-D (edit) ruby ./evil-wpa_access-point.rb
Fake Access Points TW-D (edit) ruby ./fake_access-points.rb
Mass Handshakes TW-D (edit) ruby ./mass-handshakes.rb
Rogue Access Points TW-D (edit) ruby ./rogue_access-points.rb
Twin Access Points TW-D (edit) ruby ./twin_access-points.rb
GENERAL Author Usage
System Status, Disk Usage, ... TW-D (edit) ruby ./dashboard-stats.rb
Networking Interfaces TW-D (edit) ruby ./networking-interfaces.rb
System Logs TW-D (edit) ruby ./system-logs.rb
RECON Author Usage
Access Points and Clients on 2.4GHz and 5GHz (with a supported adapter) TW-D (edit) ruby ./access-points_clients_5ghz.rb
Access Points and Clients TW-D (edit) ruby ./access-points_clients.rb
MAC Addresses of Access Points TW-D (edit) ruby ./access-points_mac-addresses.rb
Tagged Parameters of Access Points TW-D (edit) ruby ./access-points_tagged-parameters.rb
Access Points and Wireless Network Mapping with WiGLE TW-D (edit) ruby ./access-points_wigle.rb
MAC Addresses of Clients TW-D (edit) ruby ./clients_mac-addresses.rb
OPEN Access Points TW-D (edit) ruby ./open_access-points.rb
WEP Access Points TW-D (edit) ruby ./wep_access-points.rb
WPA Access Points TW-D (edit) ruby ./wpa_access-points.rb
WPA2 Access Points TW-D (edit) ruby ./wpa2_access-points.rb
WPA3 Access Points TW-D (edit) ruby ./wpa3_access-points.rb
WARDRIVING Author Usage
Continuous Recon on 2.4GHz and 5GHz (with a supported adapter) TW-D (edit) ruby ./continuous-recon_5ghz.rb [CTRL+c]
Continuous Recon for Handshakes Capture TW-D (edit) ruby ./continuous-recon_handshakes.rb [CTRL+c]
Continuous Recon TW-D (edit) ruby ./continuous-recon.rb [CTRL+c]

Payload skeleton for development

#
# Title:            <TITLE>
#
# Description:      <DESCRIPTION>
#
#
# Author:           <AUTHOR>
# Version:          <VERSION>
# Category:         <CATEGORY>
#
# STATUS
# ======================
# <SHORT-DESCRIPTION> ... SETUP
# <SHORT-DESCRIPTION> ... ATTACK
# <SHORT-DESCRIPTION> ... SPECIAL
# <SHORT-DESCRIPTION> ... FINISH
# <SHORT-DESCRIPTION> ... CLEANUP
# <SHORT-DESCRIPTION> ... OFF
#

require_relative('<PATH-TO>/classes/PineappleMK7.rb')

system_authentication = PineappleMK7::System::Authentication.new
system_authentication.host = "<PINEAPPLE-IP-ADDRESS>"
system_authentication.port = 1471
system_authentication.mac = "<PINEAPPLE-MAC-ADDRESS>"
system_authentication.password = "<ROOT-ACCOUNT-PASSWORD>"

if (system_authentication.login)

    led =    PineappleMK7::System::LED.new

    # SETUP
    #
    led.setup

    #
    # [...]
    #

    # ATTACK
    #
    led.attack

    #
    # [...]
    #

    # SPECIAL
    #
    led.special

    #
    # [...]
    #

    # FINISH
    #
    led.finish

    #
    # [...]
    #

    # CLEANUP
    #
    led.cleanup

    #
    # [...]
    #

    # OFF
    #
    led.off

end

Note : Don't hesitate to take inspiration from the payloads directory.

System modules

Authentication accessors/method

system_authentication = PineappleMK7::System::Authentication.new

system_authentication.host = (string) "<PINEAPPLE-IP-ADDRESS>"
system_authentication.port = (integer) 1471
system_authentication.mac = (string) "<PINEAPPLE-MAC-ADDRESS>"
system_authentication.password = (string) "<ROOT-ACCOUNT-PASSWORD>"

system_authentication.login()

LED methods

led = PineappleMK7::System::LED.new

led.setup()
led.failed()
led.attack()
led.special()
led.cleanup()
led.finish()
led.off()

Pineapple Modules

Dashboard

Notifications method

dashboard_notifications = PineappleMK7::Modules::Dashboard::Notifications.new

dashboard_notifications.clear()

Stats method

dashboard_stats = PineappleMK7::Modules::Dashboard::Stats.new

dashboard_stats.output()

Logging

System method

logging_system = PineappleMK7::Modules::Logging::System.new

logging_system.output()

PineAP

Clients methods

pineap_clients = PineappleMK7::Modules::PineAP::Clients.new

pineap_clients.connected_clients()
pineap_clients.previous_clients()
pineap_clients.kick( (string) mac )
pineap_clients.clear_previous()

EvilWPA accessors/method

evil_wpa = PineappleMK7::Modules::PineAP::EvilWPA.new

evil_wpa.ssid = (string default:'PineAP_WPA')
evil_wpa.bssid = (string default:'00:13:37:BE:EF:00')
evil_wpa.auth = (string default:'psk2+ccmp')
evil_wpa.password = (string default:'pineapplesareyummy')
evil_wpa.hidden = (boolean default:false)
evil_wpa.enabled = (boolean default:false)
evil_wpa.capture_handshakes = (boolean default:false)

evil_wpa.save()

Filtering methods

pineap_filtering = PineappleMK7::Modules::PineAP::Filtering.new

pineap_filtering.client_filter( (string) 'allow' | 'deny' )
pineap_filtering.add_client( (string) mac )
pineap_filtering.clear_clients()
pineap_filtering.ssid_filter( (string) 'allow' | 'deny' )

Impersonation methods

pineap_impersonation = PineappleMK7::Modules::PineAP::Impersonation.new

pineap_impersonation.output()
pineap_impersonation.add_ssid( (string) ssid )
pineap_impersonation.clear_pool()

OpenAP method

open_ap = PineappleMK7::Modules::PineAP::OpenAP.new

open_ap.output()

Settings accessors/method

pineap_settings = PineappleMK7::Modules::PineAP::Settings.new

pineap_settings.enablePineAP = (boolean default:true)
pineap_settings.autostartPineAP = (boolean default:true)
pineap_settings.armedPineAP = (boolean default:false)
pineap_settings.ap_channel = (string default:'11')
pineap_settings.karma = (boolean default:false)
pineap_settings.logging = (boolean default:false)
pineap_settings.connect_notifications = (boolean default:false)
pineap_settings.disconnect_notifications = (boolean default:false)
pineap_settings.capture_ssids = (boolean default:false)
pineap_settings.beacon_responses = (boolean default:false)
pineap_settings.broadcast_ssid_pool = (boolean default:false)
pineap_settings.broadcast_ssid_pool_random = (boolean default:false)
pineap_settings.pineap_mac = (string default:system_authentication.mac)
pineap_settings.target_mac = (string default:'FF:FF:FF:FF:FF:FF')<   br/>pineap_settings.beacon_response_interval = (string default:'NORMAL')
pineap_settings.beacon_interval = (string default:'NORMAL')

pineap_settings.save()

Recon

Handshakes methods

recon_handshakes = PineappleMK7::Modules::Recon::Handshakes.new

recon_handshakes.start( (object) ap )
recon_handshakes.stop()
recon_handshakes.output()
recon_handshakes.download( (object) handshake, (string) destination )
recon_handshakes.clear()

Scanning methods

recon_scanning = PineappleMK7::Modules::Recon::Scanning.new

recon_scanning.start( (integer) scan_time )
recon_scanning.start_continuous( (boolean) autoHandshake )
recon_scanning.stop_continuous()
recon_scanning.output( (integer) scanID )
recon_scanning.tags( (object) ap )
recon_scanning.deauth_ap( (object) ap )
recon_scanning.delete( (integer) scanID )

Settings

Networking methods

settings_networking = PineappleMK7::Modules::Settings::Networking.new

settings_networking.interfaces()
settings_networking.client_scan( (string) interface )
settings_networking.client_connect( (object) network, (string) interface )
settings_networking.client_disconnect( (string) interface )
settings_networking.recon_interface( (string) interface )


❌