KitPloit - PenTest Tools!

ICMPWatch - ICMP Packet Sniffer

ICMP Packet Sniffer is a Python program that allows you to capture and analyze ICMP (Internet Control Message Protocol) packets on a network interface. It provides detailed information about the captured packets, including source and destination IP addresses, MAC addresses, ICMP type, payload data, and more. The program can also store the captured packets in a SQLite database and save them in a pcap format.

Features

• Capture and analyze ICMP Echo Request and Echo Reply packets.
• Display detailed information about each ICMP packet, including source and destination IP addresses, MAC addresses, packet size, ICMP type, and payload content.
• Save captured packet information to a text file.
• Store captured packet information in an SQLite database.
• Save captured packets to a PCAP file for further analysis.
• Support for custom packet filtering based on source and destination IP addresses.
• Colorful console output using ANSI escape codes.
• User-friendly command-line interface.

Requirements

• Python 3.7+
• scapy 2.4.5 or higher
• colorama 0.4.4 or higher

Installation

1. Clone this repository:

git clone https://github.com/HalilDeniz/ICMPWatch.git

2. Install the required dependencies:

pip install -r requirements.txt

Usage

python ICMPWatch.py [-h] [-v] [-t TIMEOUT] [-f FILTER] [-o OUTPUT] [--type {0,8}] [--src-ip SRC_IP] [--dst-ip DST_IP] -i INTERFACE [-db] [-c CAPTURE]

• -v or --verbose: Show verbose packet details.
• -t or --timeout: Sniffing timeout in seconds (default is 300 seconds).
• -f or --filter: BPF filter for packet sniffing (default is "icmp").
• -o or --output: Output file to save captured packets.
• --type: ICMP packet type to filter (0: Echo Reply, 8: Echo Request).
• --src-ip: Source IP address to filter.
• --dst-ip: Destination IP address to filter.
• -i or --interface: Network interface to capture packets (required).
• -db or --database: Store captured packets in an SQLite database.
• -c or --capture: Capture file to save packets in pcap format.

Press Ctrl+C to stop the sniffing process.

Examples

• Capture ICMP packets on the "eth0" interface:

python icmpwatch.py -i eth0

• Sniff ICMP traffic on interface "eth0" and save the results to a file:

python dnssnif.py -i eth0 -o icmp_results.txt

• Filtering by Source and Destination IP:

python icmpwatch.py -i eth0 --src-ip 192.168.1.10 --dst-ip 192.168.1.20

• Filtering ICMP Echo Requests:

python icmpwatch.py -i eth0 --type 8

• Saving Captured Packets

python icmpwatch.py -i eth0 -c captured_packets.pcap

KitPloit - PenTest Tools!

DoSinator - A Powerful Denial Of Service (DoS) Testing Tool

DoSinator is a versatile Denial of Service (DoS) testing tool developed in Python. It empowers security professionals and researchers to simulate various types of DoS attacks, allowing them to assess the resilience of networks, systems, and applications against potential cyber threats. 

Features

• Multiple Attack Modes: DoSinator supports SYN Flood, UDP Flood, and ICMP Flood attack modes, allowing you to simulate various types of DoS attacks.
• Customizable Parameters: Adjust the packet size, attack rate, and duration to fine-tune the intensity and duration of the attack.
• IP Spoofing: Enable IP spoofing to mask the source IP address and enhance anonymity during the attack.
• Multithreaded Packet Sending: Utilize multiple threads for simultaneous packet sending, maximizing the attack speed and efficiency.

Requirements

• Python 3.x
• scapy
• argparse

Installation

1. Clone the repository:

   git clone https://github.com/HalilDeniz/DoSinator.git

2. Navigate to the project directory:

   cd DoSinator

3. Install the required dependencies:

   pip install -r requirements.txt

Usage

usage: dos_tool.py [-h] -t TARGET -p PORT [-np NUM_PACKETS] [-ps PACKET_SIZE]
                   [-ar ATTACK_RATE] [-d DURATION] [-am {syn,udp,icmp,http,dns}]
                   [-sp SPOOF_IP] [--data DATA]

optional arguments:
  -h, --help            Show this help message and exit.
  -t TARGET, --target TARGET
                        Target IP address.
  -p PORT, --port PORT  Target port number.
  -np NUM_PACKETS, --num_packets NUM_PACKETS
                        Number of packets to send (default: 500).
  -ps PACKET_SIZE, --packet_size PACKET_SIZE
                        Packet size in bytes (default: 64).
  -ar ATTACK_RATE, --attack_rate ATTACK_RATE
                        Attack rate in packets per second (default: 10).
  -d DURATION, --duration DURATION
                        Duration of the attack in seconds.
  -am {syn,udp,icmp,htt   p,dns}, --attack-mode {syn,udp,icmp,http,dns}
                        Attack mode (default: syn).
  -sp SPOOF_IP, --spoof-ip SPOOF_IP
                        Spoof IP address.
  --data DATA           Custom data string to send.

• target_ip: IP address of the target system.
• target_port: Port number of the target service.
• num_packets: Number of packets to send (default: 500).
• packet_size: Size of each packet in bytes (default: 64).
• attack_rate: Attack rate in packets/second (default: 10).
• duration: Duration of the attack in seconds.
• attack_mode: Attack mode: syn, udp, icmp, http (default: syn).
• spoof_ip: Spoof IP address (default: None).
• data: Custom data string to send.

Disclaimer

The usage of the Dosinator tool for attacking targets without prior mutual consent is illegal. It is the end user's responsibility to obey all applicable local, state, and federal laws. The author assumes no liability and is not responsible for any misuse or damage caused by this program.

By using Dosinator, you agree to use this tool for educational and ethical purposes only. The author is not responsible for any actions or consequences resulting from misuse of this tool.

Please ensure that you have the necessary permissions to conduct any form of testing on a target network. Use this tool at your own risk.

Contributing

Contributions are welcome! If you find any issues or have suggestions for improvements, feel free to open an issue or submit a pull request.

Contact

If you have any questions, comments, or suggestions about Dosinator, please feel free to contact me:

• LinkedIn: Halil Ibrahim Deniz
• TryHackMe: Halilovic
• Instagram: deniz.halil333
• YouTube: Halil Deniz
• Email: halildeniz313@gmail.com

Naked Security

Ping of death! FreeBSD fixes crashtastic bug in network tool